Connecting the Power and Cables

The EdgeMarc 4808 and EdgeMarc 4806 come with an AC power cord for connecting the AC power adapter to an AC outlet.

Caution

Always connect the AC power cord to an AC outlet suitable for the power supply that came with the unit to reduce the risk of damage.

Caution

Secure the AC power cord to a cable management system using a power cord strap or tie wrap to ensure the EdgeMarc does not hang from the AC outlet. The EdgeMarc has a hole built into the rear of the device to secure the power cord strap.


1. If connecting to an Internet router or Internet DMZ switch, connect the Ethernet cable to the WAN Interface port (Port 2) on the EdgeMarc and the other end to the WAN device.
2. Power on the system.

Powering On the EdgeMarc

1. Turn on the EdgeMarc power switch.
2. Make sure that the power and status LEDs on the front panel are solid green after the EdgeMarc powers on. Refer Product Overview for information about Power and Status LEDs.
3. Proceed to Configuring Basic Network Settings.

  • No labels