EdgeMarc 4808 Rear Panel

Press the Erase button in quick succession to control the following:

• One click—No action.
• Two clicks—Resets the CLI password to what is stored in the manufacturing configuration.

• Three clicks—Restores to factory default settings and reboots the system.

  Note

  When restored to factory default settings, the current configuration is lost, disconnecting all VoIP devices, Internet connectivity, and network access for computers until the system is reconfigured.

  Note

   If the Erase button is disabled (as noted on the Admin page of the GUI) and you wish to reset the password, please contact the Global Support Assistance Center:

  Ribbon Support Portal:  https://ribboncommunications.com/services/ribbon-support-portal-login.

  Voice: +1-833-RIBBON1 (1-833-742-2661)

Power

• Off: Power is not supplied to the device or bootloader failed to load.
• On: Solid Green—Power is supplied to the unit. VOS is ready.

Status

• Off—Power is not supplied to the device, or bootloader failed to load.
• On: Solid Green—Power is supplied to the unit. VOS is ready.
• Flashing Green—The device is loading the EdgeMarc VoIP Operation System (VOS).
• Solid Amber—The device is running a self-test and is initializing.
• Flashing Amber—The device is upgrading its software.
• Red—The device is in the bootloader. The kernel will change the LED to solid amber once the kernel starts loading.