In this section:

Connecting the Power and Cables

The EdgeMarc 300 Series includes an AC power adapter for connecting to an AC outlet. Connect it and power on the system.

Caution

Always connect the AC power cord to an AC outlet suitable for the power supply that came with the unit to reduce the risk of damage.

Caution

Secure the AC power cord to a cable management system using a fastener or tie wrap to insure the EdgeMarc does not hang from the AC outlet.

For information on how to configure the VOS, see Configuring VOS for EdgeMarc 300 Series Devices.

Warning

The equipment has a separate protective earthing terminal on the chassis that must be permanently connected to earth ground to adequately ground the chassis and protect the operator from electrical hazards.

Powering on the EdgeMarc 300 Series 

  1. Connect the DC connector from the power adapter to power port on the EdgeMarc.
  2. Make sure that the power and status LEDs on the front panel are solid green after the EdgeMarc powers on.
  3. Proceed to Configuring Basic Network Settings.  


    .
  • No labels