Mount the EdgeMarc on a wall using the two mounting brackets on the bottom of the appliance. We recommend that you use two round or pan head screws.

  1. Install two screws 5.9063” (150 mm) horizontally apart on a wall or other vertical surface. The screws should protrude from the wall so that you can fit the appliance between the head of the screw and the wall, as shown below.

    Mounting Brackets

    Note

    If you install the screws in drywall, use hollow wall anchors to ensure that the unit does not pull away from the wall due to prolonged strain from the cable and power connectors.

  2. Remove the EdgeMarc device and accessories from the shipping container.
  3. Mount the device with the front panel placed horizontally facing up or down on the wall.
  • No labels