In this section:

Perform the following procedures to verify Signaling Gateway (SG) configuration.

Note

Performing the procedures in this section is optional; hence, it is only required if your system is licensed for the SG application M3UA and/or SUA.

Note

CIC UA configuration is dynamic and is in limited use.

Verify the system SG M3UA configuration

Start

  1. From the Main Menu, click SG. 
  2. Click M3UA.

  3. Click M3UA SCTP Servers and record all information as required in the following table.

    SlotServer IDIP Address 1IP Address 2PortStatusListen Status






















  4. Navigate back to the screen indicated in step 2, click M3UA ASPs, and record all information as required in the following table.

    SlotServer IDIDAssocIDIP Address 1NameStateRx MSG CountTx MSG Count



























  5. Navigate back to the screen indicated in step 2, click M3UA Configured ASPs, and record all information as required in the following two tables.

    SlotServer IDIDAssocIDIP Address 1NameStateRx MSG CountTx MSG Count



























    IDNameASP TypeSCTP RoleM3UA Version





  6. Navigate back to the screen indicated in step 2, click M3UA Multi ASPs, and record all information as required in the following table.

    Multi ASP IDAssociation IDSlotUser ActivatedSCTP StateM3UA StateRx Message CountTx Message Count
























  7. Navigate back to the screen indicated in step 2, click M3UA App Servers, and record all information as required in the following table. 

    Routing ContextDPCStatus









Verify the system SG SUA configuration

Start

  1. From the Main menu, click SUA.

  2. Click SUA SCTP Servers and record all information as required in the following table.

    SlotServer IDIP Address 1IP Address 2PortStatusListen Status





















  3. Navigate back to the screen indicated in step 2, click SUA ASPs, and record all information as required in the following table.

    SlotServer IDIDAssocIDIP Address 1NameStateRx MSG CountTx MSG Count



























  4. Navigate back to the screen indicated in step 2, click SUA Configured ASPs, and record all information as required in the following table.

    IDIP Address 1PortName








  5. Navigate back to the screen indicated in step 2, click SUA App Servers, and record all information as required in the following table.

    Routing ContextDPCStatus







  • No labels