Navigating in the Main Menu or submenus is the same for both root and non-root users. To select a particular menu, type the number that corresponds to the menu you want to view, and then press ENTER. For example, if you’re using the Main Menu, select MTP3 by typing 1, and then press ENTER.

The System Manager submenus follow the same design standards. Any differences between how these user interfaces work are noted in this guide.

The following figure shows an example of the Menu UI screen (Card Configuration) and shows the basic functional areas. Depending on the action you take and the specific attribute you view or set, one or more of these fields may be unavailable.

Example of the Menu UI


The following table lists the basic functional areas for the Menu UI screen and describes these areas.

Menu UI Screen Functional Areas: Listing and Description

Functional Area Description
1. Header Information Contains the name of the screen you are viewing.
2. Attributes and Values Provides the current settings for the screen.
3. Hostname
Provides the hostname, IP address of your DSC - SP2000 Platforms, and page number of the screen. If the hostname is one in a series of screens, then the page number appears in the right corner and the hostname and IP address you are configuring appears just below the page number. If there is only one screen, then the hostname and IP address replaces the page number.
4. Status Provides any instructions associated with a particular action.
5. Instructions Provides you with online help.
6. User Input Allocated for your input to manipulate the interface.
7. Menu Navigation Commands Provides you with the keystrokes you have to use to manipulate the screen (see the following table)
8. Actions Available Displays various actions you can perform.
9. Page Number Displays the page you are currently viewing if there are several pages available for the configuration.


The following table includes the available keystrokes for manipulating the DSC - SP2000 user interface screen.

Note

You can only use the keystrokes in this table if they are listed and, therefore, are available in the user interface that appears on your screen, with the exception of q, ENTER, and CTRL+ c (used for terminating from some sessions if you are logged onto the system).

1This key is only found in the Logviewer.

Menu Navigation and Command Keystrokes

Keystroke

Navigation

Definition

a

action

Moves you to the Available Action area of the screen.

h

help

Displays online help information.

x

delete

Allows you to delete an action.

n

next

Displays the next screen in a series of screens (in the same user interface).

p

previous

Displays the previous screen in a series of screens (in the same user interface).

b

back

Displays the previous screen in a series of screens.

c

create

Allows you to create a new attribute.

v

full value

Allows you to display the full value in a field that has been truncated.

d

detail

Displays the details for a specific attribute.

SPACE BAR

edit

Allows you to edit the field.

ENTER

select

Confirms your selection or input.

q, and ENTER

n/a

If q is an option listed at the bottom of your screen, pressing q and then ENTER takes you to the Main Menu.

l, and ENTER

n/a

If you are logged onto the system as root, pressing l (letter l) and ENTER logs you off the Main Menu and displays the CLI.

t1

top

Displays your cursor in the line that shows the oldest log in the log file.

b1

bottom

Displays your cursor in the line that shows the latest log in your log file.

- (minus key)1

left

One screen in the Menu UI can display up to 80 characters in one line. However, one line in the log file can contain up to 400 characters. Therefore, you can use the - (minus) and + (plus) keys to display additional characters in the same line. Each time you press the - and + keys, the display shifts left (-) or right (+) and an additional 40 characters of the log file line are shown.

+ (plus key)1

right

See - (minus key) entry.

T1

tail-mode

Activates a toggle switch for tail-mode ON/OFF. If T=ON, then the logs are shown in real-time (are dynamically refreshed) in the log viewer. If T=OFF, then the log entries are not dynamically refreshed in the log viewer.

s1

search

Activates the search function. You are prompted to enter a string (time, date, log type based on an application) to find particular information in the log file.

a1

search again

Displays the next entry in a search.


  • No labels