In this section:
The following tables list and describe the supported SFP/SFP+ Modules.
Type | Source | Manufacturer Part Number | Notes |
---|---|---|---|
10/100/1000BASE-T (Copper) | Avago | ABCU-5710RZ | The link is only established at 1 Gbps when using copper SFP Modules. |
Methode | DM7041-R | ||
1000BASE-SX | Amphenol | 553250001 | An 850 nm module supporting a maximum distance of 550 m over single mode or multimode fiber. |
Intel | TXN31111 | An 850 nm module supporting a maximum distance of 550 m over single mode or multimode fiber. | |
Fiberxon | FTM-8012C-SLG | An 850 nm module supporting a maximum distance of 550 m over single mode or multimode fiber. | |
1000BASE-LX | Avago | AFCT-5710PZ | A 1310 nm module supporting a maximum distance of 10 km over single mode fiber. |
Finisar | FTLF1318P2BT | A 1310 nm module supporting a maximum distance of 10 km over single mode fiber. | |
FTLF1319P1BTL | A 1310 nm module supporting a maximum distance of 10 km over single mode fiber. | ||
10GBASE-SR | Avago | AFBR-703SDZ | -- |
Opnext | TRS2001EN-00001 | 850 nm, 300 M with OM3 MMF | |
FCI | TRX10GVP2010 | -- | |
Finisar | FTLX8571D3BCL | -- | |
10GBASE-LRM | FCI | TRX10GDL0610 | -- |
Finisar | FTLX1371D3BCL | 1310 nm, 220 M with MO1 fiber | |
Avago | AFBR-707SDZ | -- | |
10G Copper Cable | Tyco | 2032237-4 | 3.0m |
Molex | 74752-2301 | -- | |
FCI | 10110818-3030-LF | -- | |
Molex | 74752-4701 | 7.0m |
If the 10 GbE Switch Fat Pipe (SFP/SFP+ bays) connections do not have a module installed, these connections should have an SFP/SFP+ EMI/dust plug installed (Ribbon PN 11-200Q056610 or Tyco PN1888901-1, see the following figure). This plug reduces emissions from internal AMC671 MCH circuitry and helps prevent dust in the bay. The plug has a tang that mates with the SFP/SFP+ cage to ensure proper retention.
SFP/SFP+ EMI/Dust Plug
Two principle extraction actuators (see the following figure) are employed on SFP/SFP+ modules:
SFP/SFP+ Module Actuators