In this section:
Perform the following procedures to verify Signaling Gateway (SG) configuration.
Performing the procedures in this section is optional; hence, it is only required if your system is licensed for the SG application M3UA and/or SUA.
CIC UA configuration is dynamic and is in limited use.
To verify the system SG M3UA configuration
- From the Main Menu, click SG.
- Click M3UA.
Click M3UA SCTP Servers and record all information as required in the following table.
Navigate back to the screen indicated in step 2, click M3UA ASPs, and record all information as required in the following table.
Navigate back to the screen indicated in step 2, click M3UA Configured ASPs, and record all information as required in the following two tables.
Navigate back to the screen indicated in step 2, click M3UA Multi ASPs, and record all information as required in the following table.
Navigate back to the screen indicated in step 2, click M3UA App Servers, and record all information as required in the following table.
To verify the system SG SUA configuration
- From the Main menu, click SUA.
Click SUA SCTP Servers and record all information as required in the following table.
Navigate back to the screen indicated in step 8, click SUA ASPs, and record all information as required in the following table.
Navigate back to the screen indicated in step 8, click SUA Configured ASPs, and record all information as required in the following table.
Navigate back to the screen indicated in step 8, click SUA App Servers, and record all information as required in the following table.