This section provides the procedure to create a USB key backup on the working AMC121 CPU. This newly created USB key will be used to restore the SP2000 O/S, application software, and data configuration on the new AMC121 CPU. 

Before you can create a USB key backup you must deactivate the new AMC121 CPU.

To create a USB key backup 

Tip

 In this example, the Carrier blade slot is 14 and the failed AMC121 CPU is in subslot 4.

 

  1. From the VSE CLI interface, deactivate the failed AMC121 CPU.

    hardware app-blade deactivate <frame shelf slot subslot>


    For example,

    ha app-blade deactivate 0 0 14 4
  2. Insert the USB key into the USB Port on the working AMC121 CPU.

  3. Start the Web UI using the working AMC121 CPU Management IP address.

  4. Click Backups.
      

  5. Click Complete System Backup.

     

  6. Click Start System Backup to start the USB key backup.

     

  7. Check the status of the USB key backup by refreshing the page.

     

  8. Remove the USB key after USB key backup is successfully done.