In this section:

Before you start the DSC - SP2000 Main Menu, it is assumed that you have completed the following tasks:

  • installed the required licenses
  • configured the required passwords
  • can access the DSC - SP2000 Platform Main Menu

If you have not already completed these tasks and require information about performing the tasks, refer to the Installation Guides and the DSC - SP2000 Platform Manager User Guide

You can access all aspects of the Web UI with root user privileges (referred to in this document as a root user). The root user can create new users, and apply up to four profiles with various levels of read/write (RW) access.

The following table lists the various access levels to the DSC - SP2000 Platforms, SS7, and System Manager configuration utilities.

Access Levels to the DSC SS7 Configuration Utilities

Task SS7_ADMIN MTP_OPERATOR SCCP_OPERATOR MONITOR
Configuration Utilities
UPP ro1 ro ro ro
MTP3 rw2 rw ro ro
SNMP rw rw rw ro
GWST rw rw rw ro
SCCP rw ro rw ro
IWF rw rw rw ro
DSC / SS73 rw rw rw ro
Signaling Gateway rw ro rw ro
GTT rw ro rw ro
PCE rw ro rw ro
Level 4 Converter rw ro rw ro
IMF rw rw rw ro
INAPGW rw ro rw ro
System Manager Configuration Utilities
 

Read-only, except:

  • application configuration backup
  • test mail server
  • ping/trace (server) test
  • change password

Read-only, except:

  • test mail
  • ping/trace (server)
  • change own password

Read-only, except:

  • test mail
  • ping/trace (server)
  • change own password

Read-only, except:

  • test mail
  • ping/trace (server)
  • change own password

1ro = Read-only

2rw = Read and write

3DSC = applicable to the DSC Platform; SS7 = applicable to the SP2000 Platform.

Note

For more information about User Profiles and Privileges (UPP), refer to the Platform User Guide.

The following figure shows the DSC Web UI Main Menu.

DSC Main Menu

Note

The Hardware, Hardware Monitor, and Switch Monitor configuration utilities are not supported for the DSC SWe.

The following figure shows the SP2000 Web UI Main Menu.

SP2000 Main Menu

The Menu UI is accessible through the IP Addresses of the DSC - SP2000 using an SSH session (refer to Configuring Secure Shell and Secure FTP).

Note

The Menu UI is not supported for the DSC 8000 or the SP2000.

The following figure shows the Main Menu for the DSC Platform Menu UI.

Main Menu

The following figure shows the Main Menu for the SP2000 Platform Menu UI.

SP2000 Main Menu UI

 

  • No labels