This section describes Transaction Language 1 (TL1) commands related to the Level 4 Converter.
Level 4 Converter Command Groupings
The following figure lists the Level 4 Converter objects that can be configured using TL1 commands.
This section includes the information for the Level 4 Converter command set.
Level 4 Converter Configuration
VFY-L4CVTR-CFG
VFY-L4CVTR-CFG:::[CTAG];
CHG-L4CVTR-CFG
CHG-L4CVTR-CFG:::[CTAG]:::::[REGTIMER=<Duration>],[INCAPPIDPREC=<IncAppIDChoice>],[ROUTEMAPLIMIT=<int>],[PAKISTAN_CBN=<int>],[FATIMER=<Duration>],[CGACKTIMER=<Duration>],[ERRORS=<LogBoolean>],[SETUPMGMT=<LogBoolean>],[EXECTRACE=<LogBoolean>],[LAYERCOMM=<LogBoolean>],[PEERMGMT=<LogBoolean>],[MSGCONTENT=<LogBoolean>],[MSGPARSING=<LogBoolean>],[PEER_LDL_LVL=<LogLevel>],[CPAMID=<int>],[CPAPID=<int>];
SET-L4CVTR-CFG
SET-L4CVTR-CFG:::[CTAG]:::[ACTIVATE/DEACTIVATE/RESTORE_DBG];
:::<ACTPEER=int>,<STATUS=TrafficEnum>,<ISUPSUPPORT=SILicEnum>,<SCCPSUPPORT=SILicEnum>,<BICCSUPPORT=SILicEnum>,<REGTIMER=Duration>,<INCAPPIDPREC=IncAppIDChoice>,<ROUTEMAPLIMIT=int>,<PAKISTAN_CBN=int>,<FATIMER=Duration>,<CGACKTIMER=Duration>,<ERRORS=LogBoolean>,<SETUPMGMT=LogBoolean>,<EXECTRACE=LogBoolean>,<LAYERCOMM=LogBoolean>,<PEERMGMT=LogBoolean>,<MSGCONTENT=LogBoolean>,<MSGPARSING=LogBoolean>,<IPVARCFG=ShowHideConfig>,<IPPORT=int>,<CPAMID=int>,<CPAPID=int>;
Attribute Details
ACTPEER - Active Peer ID
Permissions: Read-only
Type: int
Description: The active peer identifier as defined by the converter LDL file. The converter LDL file (cvtr_ldl.conf) is located in the /opt/cpu_ss7gw/current/data directory.
STATUS - Traffic Status
Permissions: Read-only
Type: TrafficEnum={INACTIVE,ACTIVE,UNLICENSED}
Description: Traffic status (INACTIVE/ACTIVE/UNLICENSED). The traffic should only be inactive during the initial configuration of the converter system.
ISUPSUPPORT - ISUP Support
Permissions: Read-only
Type: SILicEnum={UNLICENSED,LICENSED}
Description: ISUP Support (UNLICENSED/LICENSED).
SCCPSUPPORT - SCCP Support
Permissions: Read-only
Type: SILicEnum={UNLICENSED,LICENSED}
Description: SCCP Support (UNLICENSED/LICENSED).
BICCSUPPORT - BICC Support
Permissions: Read-only
Type: SILicEnum={UNLICENSED,LICENSED}
Description: BICC Support (UNLICENSED/LICENSED).
REGTIMER - Reregistration Timer
Permissions: Writeable
Type: Duration={DISABLED, 1 to 999999}
Description: Interval at which reregistration is initiated (in seconds). Set to 0 (DISABLED) to disable the reregistration. Default 60 seconds. Valid range is 0 to 999999.
INCAPPIDPREC - Incoming AppID Precedence
Permissions: Writeable
Type: IncAppIDChoice={OPC,DPC}
Description: Incoming AppID Precedence (OPC/DPC). Precedence only applies if both associated Route Mappings for an MSU conversion contain an Incoming AppID. The chosen Incoming AppID will be taken from the Routing Mapping corresponding with either the OPC or DPC as per this attribute.
ROUTEMAPLIMIT - Route Mapping Limit
Permissions: Writeable
Type: int(Range: [2000..4000])
Description: L4 Cvtr max route mapping limit. This attribute limits the number of Route Mapping objects that may be created for each SS7 Variant. Default 2000. Valid range is 2000 to 4000. This limit is set to 200 and is not modifiable in ANSI-ITU variant conversion configurations.
PAKISTAN_CBN - Pakistan CBN
Permissions: Writeable
Type: int
Description: Pakistan fixed Charge Band Number parameter value. Used in the Pakistan-ITU converter only for default settings. Valid range is 0 to 255.
FATIMER - Fast Answer Timer
Permissions: Writeable
Type: Duration={DISABLED, 1 to 999999}
Description: Lifespan of Fast Answer record (in seconds). Used in the ANSI-ITU converter only for ACM and ANM conversion. Set to 0 (DISABLED) to disable the Fast Answer feature. Default 60 seconds. Valid range is 0 to 999999.
CGACKTIMER - CG Ack Timer
Permissions: Writeable
Type: Duration={DISABLED, 1 to 999999}
Description: Lifespan of Circuit Group Acknowledgement record (in seconds). Used in the ANSI-ITU converter only for circuit group acknowledgement message management due to circuit range incompatibility between the variants. Default 60 seconds. Valid range is 1 to 999999.
ERRORS - Errors
Permissions: Writeable
Type: LogBoolean={NOT LOGGED,LOGGED}
Description: Enable or disable debug logging of the converter errors; should be logged for production systems.
SETUPMGMT - Setup Management
Permissions: Writeable
Type: LogBoolean={NOT LOGGED,LOGGED}
Description: Enable or disable debug logging of the setup management; should be logged for production systems.
EXECTRACE - Execution Trace
Permissions: Writeable
Type: LogBoolean={NOT LOGGED,LOGGED}
Description: Enable or disable debug logging of the execution trace; should not be logged for production systems.
LAYERCOMM - Layer Communication
Permissions: Writeable
Type: LogBoolean={NOT LOGGED,LOGGED}
Description: Enable or disable debug logging of layer communication; should not be logged for production systems.
PEERMGMT - Peer Management
Permissions: Writeable
Type: LogBoolean={NOT LOGGED,LOGGED}
Description: Enable or disable debug logging of the peer management; should not be logged for production systems.
MSGCONTENT - Message Content
Permissions: Writeable
Type: LogBoolean={NOT LOGGED,LOGGED}
Description: Enable or disable debug logging of the message content; must not be logged for production systems. System logs to debug the raw hexadecimal dump of the SS7 messages.
MSGPARSING - Message Parsing
Permissions: Writeable
Type: LogBoolean={NOT LOGGED,LOGGED}
Description: Enable or disable debug logging of the message parsing; must not be logged for production systems. System logs to debug the detailed decoded parsed output of the messages.
PEER_LDL_LVL - LDL Debug
Permissions: Writeable
Type: LogLevel={NOT LOGGED, 1 to 10}
Description: The LDL Debug Level should be set to 2 or lower on all production systems, unless directed by support. Otherwise the system performance may be impacted. Valid range is (0 [NOT LOGGED], 1 to 10).
IPVARCFG - IP Variant Configuration
Permissions: Read-only
Type: ShowHideConfig={NOT APPLICABLE}
Description: This screen is not applicable for SS7 to SS7 traffic deployment.
IPPORT - IP Service Port
Permissions: Read-only
Type: int
Description: IP service port (IP-SS7 converter only). Signaling Gateway connection for User Application Protocol (UAP) management
CPAMID - CPAM ID
Permissions: Writeable
Type: int
Description: CPA Message identifier (IP-SS7 converter only). Used to envelop an unsupported message sent to the IP application for Custom Pass Along (CPA) back to the SS7 network. Valid range is 0 to 255.
CPAPID - CPAP ID
Permissions: Writeable
Type: int
Description: CPA parameter identifier (IP-SS7 converter only). Used to envelop an unsupported parameter sent to the IP application for Custom Pass Along (CPA) back to the SS7 network. Valid range is 0 to 255.
Level 4 Converter Statistics
VFY-L4CVTR-STATS
VFY-L4CVTR-STATS:::[CTAG];
SET-L4CVTR-STATS
SET-L4CVTR-STATS:::[CTAG]:::[REFRESHSTATS/RESETSTATS];
:::<NAME1=string>,<RCV1=int>,<DISC1=int>,<SENT1=int>,<GEN1=int>,<NAME2=string>,<RCV2=int>,<DISC2=int>,<SENT2=int>,<GEN2=int>,<REFRESHDATE=string>,<RESETDATE=string>;
Attribute Details
NAME1 - Variant 1 Name
Permissions: Read-only
Type: string
Description: Name of variant 1.
RCV1 - Variant 1 Received
Permissions: Read-only
Type: int
Description: Number of received MSU by variant 1.
DISC1 - Variant 1 Discarded
Permissions: Read-only
Type: int
Description: Number of discarded MSU by variant 1.
SENT1 - Variant 1 Sent
Permissions: Read-only
Type: int
Description: Number of sent MSU by variant 1.
GEN1 - Variant 1 Generated
Permissions: Read-only
Type: int
Description: Number of generated MSU by variant 1.
NAME2 - Variant 2 Name
Permissions: Read-only
Type: string
Description: Name of variant 2.
RCV2 - Variant 2 Received
Permissions: Read-only
Type: int
Description: Number of received MSU by variant 2.
DISC2 - Variant 2 Discarded
Permissions: Read-only
Type: int
Description: Number of discarded MSU by variant 2.
SENT2 - Variant 2 Sent
Permissions: Read-only
Type: int
Description: Number of sent MSU by variant 2.
GEN2 - Variant 2 Generated
Permissions: Read-only
Type: int
Description: Number of generated MSU by variant 2.
REFRESHDATE - Refresh Date
Permissions: Read-only
Type: string
Description: Date/Time from which the above counts were last updated. Use the Refresh All Stats action to update to the latest counts.
RESETDATE - Reset Date
Permissions: Read-only
Type: string
Description: Date/Time from which the above counts were last started or reset. Use the Reset All Stats action to reset the counts.
Level 4 Converter Peer Statistics
VFY-L4CVTR-PEERSTATS
VFY-L4CVTR-PEERSTATS::[<Peer Statistics/Peer ID>]:[CTAG];
SET-L4CVTR-PEERSTATS
SET-L4CVTR-PEERSTATS::[<Peer Statistics/Peer ID>]:[CTAG]:::[REFRESHSTATS/RESETSTATS];
::[<Peer Statistics/PeerID>]:<PEERID=int>,<NAME1=string>,<RCV1=int>,<DISC1=int>,<SENT1=int>,<GEN1=int>,<NAME2=string>,<RCV2=int>,<DISC2=int>,<SENT2=int>,<GEN2=int>,<REFRESHDATE=string>,<RESETDATE=string>;
AID Description
Peer ID - Position 1
Type: int
Description: The peer identifier as defined by the converter LDL file.
Attribute Details
PEERID - Peer ID
Permissions: Read-only
Type: int
Description: The peer identifier as defined by the converter LDL file.
NAME1 - Variant 1 Name
Permissions: Read-only
Type: string
Description: Name of variant 1.
RCV1 - Variant 1 Received
Permissions: Read-only
Type: int
Description: Number of received MSU by variant 1 on this peer.
DISC1 - Variant 1 Discarded
Permissions: Read-only
Type: int
Description: Number of discarded MSU by variant 1 on this peer.
SENT1 - Variant 1 Sent
Permissions: Read-only
Type: int
Description: Number of sent MSU by variant 1 on this peer.
GEN1 - Variant 1 Generated
Permissions: Read-only
Type: int
Description: Number of generated MSU by variant 1 on this peer.
NAME2 - Variant 2 Name
Permissions: Read-only
Type: string
Description: Name of variant 2.
RCV2 - Variant 2 Received
Permissions: Read-only
Type: int
Description: Number of received MSU by variant 2 on this peer.
DISC2 - Variant 2 Discarded
Permissions: Read-only
Type: int
Description: Number of discarded MSU by variant 2 on this peer.
SENT2 - Variant 2 Sent
Permissions: Read-only
Type: int
Description: Number of sent MSU by variant 2 on this peer.
GEN2 - Variant 2 Generated
Permissions: Read-only
Type: int
Description: Number of generated MSU by variant 2 on this peer.
REFRESHDATE - Refresh Date
Permissions: Read-only
Type: string
Description: Date/Time from which the above counts were last updated. Use the Refresh All Stats action to update to the latest counts.
RESETDATE - Reset Date
Permissions: Read-only
Type: string
Description: Date/Time from which the above counts were last started or reset. Use the Reset All Stats action to reset the counts.
Level 4 Converter SS7 Variant
VFY-L4CVTR-VARIANT
VFY-L4CVTR-VARIANT::[<L4Cvtr SS7 Variant/ID>]:[CTAG];
CHG-L4CVTR-VARIANT
CHG-L4CVTR-VARIANT::[<L4Cvtr SS7 Variant/ID>]:[CTAG]:::::[NAME=<string>],[NA=<int>],[CPASUPPORT=<FeatureBoolean>],[IAMCLDSTMAND=<FeatureBoolean>],[IAMCLGSTMAND=<FeatureBoolean>],[SCCPCLDPCCONV=<SCCPPCConv>],[SCCPCLGPCCONV=<SCCPPCConv>],[SCCPRELAY_MATELPC=<pointcode>];
SET-L4CVTR-VARIANT
SET-L4CVTR-VARIANT::[<L4Cvtr SS7 Variant/ID>]:[CTAG]:::[LOADRULES/CLEARRULES];
::[<L4Cvtr SS7 Variant/ID>]:<NAME=string>,<NA=int>,<SS7VARIANT=VariantID>,<NI=NetInd>,<CONNTYPE=SS7ConnType>,<CONNSTATUS=AvailState>,<ID=int>,<CPASUPPORT=FeatureBoolean>,<IAMCLDSTMAND=FeatureBoolean>,<IAMCLGSTMAND=FeatureBoolean>,<SCCPCLDPCCONV=SCCPPCConv>,<SCCPCLGPCCONV=SCCPPCConv>,<SCCPRELAY_MATELPC=pointcode>;
AID Description
ID - Position 1
Type: int
Description: Unique identifier of the SS7 variant.
Attribute Details
NAME - Name
Permissions: Writeable
Type: string
Description: Name of the SS7 variant.
NA - Network Appearance
Permissions: Writeable
Type: int(Range: [1..99])
Description: Network Appearance of the SS7 Variant. Valid range is 1 to 99.
SS7VARIANT - SS7 Variant
Permissions: Read-only
Type: VariantID={UNDEFINED,ITU,PAKISTAN,INDIA,CHINA,ANSI,JAPAN TTC,JAPAN NTT,NEW ZEALAND}
Description: SS7 variant provided by MTP3 on setup.
NI - Network Indicator
Permissions: Read-only
Type: NetInd={UNDEFINED,NI_00,NI_01,NI_10,NI_11}
Description: Network indicator of the SS7 variant as per MTP3.
CONNTYPE - Connection Type
Permissions: Read-only
Type: SS7ConnType={SS7,IP}
Description: Connection type (SS7/IP) of the SS7 variant.
CONNSTATUS - Connection Status
Permissions: Read-only
Type: AvailState={UNAVAILABLE,AVAILABLE}
Description: Connection status (AVAILABLE/UNAVAILABLE).
ID - ID
Permissions: Read-only
Type: int
Description: Unique identifier of the SS7 variant.
CPASUPPORT - CPA Support
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Enable or disable the Custom Pass Along (CPA) feature.
IAMCLDSTMAND - ISUP IAM CLD ST Mandatory
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Enable or disable the mandatory IAM CLD parameter ST value.
IAMCLGSTMAND - ISUP IAM CLG ST Mandatory
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Enable or disable the mandatory IAM CLG parameter ST value.
SCCPCLDPCCONV - SCCP CLD PC Conversion
Permissions: Writeable
Type: SCCPPCConv={NO MATCH DISCARD MSU,NO MATCH REMOVE PC}
Description: SCCP Called Party Address PC invalid conversion, discard MSU or remove PC.
SCCPCLGPCCONV - SCCP CLG PC Conversion
Permissions: Writeable
Type: SCCPPCConv={NO MATCH DISCARD MSU,NO MATCH REMOVE PC}
Description: SCCP Calling Party Address PC invalid conversion, discard MSU or remove PC.
SCCPRELAY_MATELPC - SCCP Relay Mate LPC
Permissions: Writeable
Type: pointcode
Description: SCCP Relay Mate Local Point Code as per MTP3 C-link definition. To reset the point code to UNSET, set to -1.
Level 4 Converter Route Mappings
VFY-L4CVTR-RTMAPS
VFY-L4CVTR-RTMAPS::[<L4Cvtr SS7 Variant/ID>]:[CTAG];
::[<L4Cvtr SS7 Variant/ID>]:<COUNT=int>;
Attribute Details
COUNT - Route Mappings
Permissions: Read-only
Type: int
Description: Number of Route Mappings
Level 4 Converter Route Mapping
VFY-L4CVTR-RTMAP
VFY-L4CVTR-RTMAP::[<L4Cvtr SS7 Variant/ID>]-[<Route Mapping/Home PC>]:[CTAG];
DLT-L4CVTR-RTMAP
DLT-L4CVTR-RTMAP::[<L4Cvtr SS7 Variant/ID>]-[<Route Mapping/Home PC>]:[CTAG];
ADD-L4CVTR-RTMAP
ADD-L4CVTR-RTMAP::[<L4Cvtr SS7 Variant/ID>]-[<Route Mapping/Home PC>]:[CTAG]:::::[MIRRORPC=<pointcode>],[DESC=<string>];
CHG-L4CVTR-RTMAP
CHG-L4CVTR-RTMAP::[<L4Cvtr SS7 Variant/ID>]-[<Route Mapping/Home PC>]:[CTAG]:::::[HOMEPC2=<pointcode>],[HOMEPC3=<pointcode>],[MIRRORPC2=<pointcode>],[MIRRORPC3=<pointcode>],[INCAPPID=<string>],[DESC=<string>],[ANSI_CC=<FeatureBoolean>],[ANSI_CCRLPARESP=<FeatureBoolean>],[ANSI_CGACK=<FeatureBoolean>],[ANSI_CLDNOA=<FeatureBoolean>],[ANSI_CLGNOA=<FeatureBoolean>],[ANSI_FCIINTL=<FeatureBoolean>],[ANSI_SENDMSG2=<FeatureBoolean>],[ANSI_CG32SUPPORT=<FeatureBoolean>],[ANSI_USITMR=<FeatureBoolean>],[ITU_CC=<int>],[ITU_CLDNOA=<FeatureBoolean>],[ITU_CLGNOA=<FeatureBoolean>],[ITU_FCIINTL=<FeatureBoolean>],[ITU_MINCLDANSIIAM=<int>],[ITU_MAXSAMS=<int>],[ITU_SAMOVERLAPTIMER=<Duration>],[ITU_USIDISCARD=<FeatureBoolean>],[JT_MANDACMBCI=<FeatureBoolean>],[JT_ACMBCICHARGE=<int>],[JT_ACMBCICLD=<int>],[JT_ACMBCIISDNACCESS=<FeatureBoolean>],[JT_MANDANMBCI=<FeatureBoolean>],[JT_ANMBCICHARGE=<int>],[JT_ANMBCICLD=<int>],[JT_ANMBCIISDNACCESS=<FeatureBoolean>],[NZ_OVERLOADSUPPORT=<FeatureBoolean>];
::[<L4Cvtr SS7 Variant/ID>]-[<Route Mapping/HomePC>]:<HOMEPC=pointcode>,<HOMEPC2=pointcode>,<HOMEPC3=pointcode>,<MIRRORPC=pointcode>,<MIRRORPC2=pointcode>,<MIRRORPC3=pointcode>,<INCAPPID=string>,<DESC=string>,<RTCONV=ShowHideConfig>,<ANSI_CC=FeatureBoolean>,<ANSI_CCRLPARESP=FeatureBoolean>,<ANSI_CGACK=FeatureBoolean>,<ANSI_CLDNOA=FeatureBoolean>,<ANSI_CLGNOA=FeatureBoolean>,<ANSI_FCIINTL=FeatureBoolean>,<ANSI_SENDMSG2=FeatureBoolean>,<ANSI_CG32SUPPORT=FeatureBoolean>,<ANSI_USITMR=FeatureBoolean>,<ITU_CC=int>,<ITU_CLDNOA=FeatureBoolean>,<ITU_CLGNOA=FeatureBoolean>,<ITU_FCIINTL=FeatureBoolean>,<ITU_MINCLDANSIIAM=int>,<ITU_MAXSAMS=int>,<ITU_SAMOVERLAPTIMER=Duration>,<ITU_USIDISCARD=FeatureBoolean>,<JT_MANDACMBCI=FeatureBoolean>,<JT_ACMBCICHARGE=int>,<JT_ACMBCICLD=int>,<JT_ACMBCIISDNACCESS=FeatureBoolean>,<JT_MANDANMBCI=FeatureBoolean>,<JT_ANMBCICHARGE=int>,<JT_ANMBCICLD=int>,<JT_ANMBCIISDNACCESS=FeatureBoolean>,<NZ_OVERLOADSUPPORT=FeatureBoolean>;
AID Description
Home PC - Position 1
Type: pointcode
Description: Switch Point Code in the home network.
Attribute Details
HOMEPC - Home PC
Permissions: Createable
Type: pointcode
Description: Switch Point Code in the home network.
HOMEPC2 - Home PC Secondary
Permissions: Writeable
Type: pointcode
Description: Switch Point Code in the home network (secondary). \nUsed with SCCP Relay if Mate LPC is defined. \nTo reset the point code to UNSET, set to -1.
HOMEPC3 - Home PC Tertiary
Permissions: Writeable
Type: pointcode
Description: Switch Point Code in the home network (tertiary). \nUsed with SCCP Relay if Mate LPC is defined. \nTo reset the point code to UNSET, set to -1.
MIRRORPC - Mirror PC
Permissions: Createable
Type: pointcode
Description: Mirror Point Code in the other network.
MIRRORPC2 - Mirror PC Secondary
Permissions: Writeable
Type: pointcode
Description: Mirror Point Code in the other network (secondary). \nUsed with SCCP Relay if Mate LPC is defined. \nTo reset the point code to UNSET, set to -1.
MIRRORPC3 - Mirror PC Tertiary
Permissions: Writeable
Type: pointcode
Description: Mirror Point Code in the other network (tertiary). \nUsed with SCCP Relay if Mate LPC is defined. \nTo reset the point code to UNSET, set to -1.
INCAPPID - Incoming AppID
Permissions: Writeable
Type: string
Description: Incoming AppID for Gateway Screening. \nOn creation, the attribute is defaulted to an empty string which disables the feature. \nAlphanumeric, dash, and underscore for a maximum of 16 characters including the terminating null.
DESC - Description
Permissions: Writeable and Createable
Type: string
Description: Route Mapping description.
RTCONV - Route Mapping Conversion
Permissions: Read-only
Type: ShowHideConfig={NOT APPLICABLE}
Description: This screen is not applicable for given variants.
ANSI_CC - ANSI Country Code
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: ANSI country code.
ANSI_CCRLPARESP - ANSI CCR LPA Response
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: ANSI requires loop back ack to a CCR msg.
ANSI_CGACK - ANSI CG Ack Broadcast
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: ANSI broadcast CG ack msg.
ANSI_CLDNOA - ANSI CLD NOA
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: ANSI force CLD nature of address to national.
ANSI_CLGNOA - ANSI CLG NOA
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: ANSI force CLG nature of address to national.
ANSI_FCIINTL - ANSI FCI International
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: ANSI forward call indicator.
ANSI_SENDMSG2 - ANSI Send Msg Twice
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: ANSI send certain messages twice.
ANSI_CG32SUPPORT - ANSI CG 32 Support
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: ANSI switch supports circuit group 32-bit range.
ANSI_USITMR - ANSI USI TMR Fallback
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: ANSI CPAP USI TMP fallback mgmt.
ITU_CC - ITU Country Code
Permissions: Writeable
Type: int
Description: ITU country code.
ITU_CLDNOA - ITU CLD NOA
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: ITU force CLD nature of address to national.
ITU_CLGNOA - ITU CLG NOA
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: ITU force CLG nature of address to national.
ITU_FCIINTL - ITU FCI International
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: ITU forward call indicator.
ITU_MINCLDANSIIAM - ITU Min CLD ANSI IAM
Permissions: Writeable
Type: int
Description: ITU minimum number of digits required in ANSI IAM.
ITU_MAXSAMS - ITU Max Number of SAM
Permissions: Writeable
Type: int
Description: ITU maximum number of expected SAM msgs.
ITU_SAMOVERLAPTIMER - ITU SAM Overlap Timer
Permissions: Writeable
Type: Duration={DISABLED, 1 to 999999}
Description: ITU SAM overlap timer. Set to 0 to disable.
ITU_USIDISCARD - ITU USI Discard
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: ITU discard USI.
JT_MANDACMBCI - Mandatory ACM BCI
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Japan ACM BCI parameter is mandatory.
JT_ACMBCICHARGE - ACM BCI Charge
Permissions: Writeable
Type: int
Description: Japan ACM BCI Charge value.
JT_ACMBCICLD - ACM BCI CLD
Permissions: Writeable
Type: int
Description: Japan ACM BCI CLD value.
JT_ACMBCIISDNACCESS - ACM BCI ISDN Access
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Japan ACM BCI ISDN Access value.
JT_MANDANMBCI - Mandatory ANM BCI
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Japan ANM BCI parameter is mandatory.
JT_ANMBCICHARGE - ANM BCI Charge
Permissions: Writeable
Type: int
Description: Japan ANM BCI Charge value.
JT_ANMBCICLD - ANM BCI CLD
Permissions: Writeable
Type: int
Description: Japan ANM BCI CLD value.
JT_ANMBCIISDNACCESS - ANM BCI ISDN Access
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Japan ANM BCI ISDN Access value.
NZ_OVERLOADSUPPORT - Overload Support
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description:NZ to ITU for Overload national support.
Level 4 Converter Message Rules
VFY-L4CVTR-MSGRULES
VFY-L4CVTR-MSGRULES::[<L4Cvtr SS7 Variant/ID>]:[CTAG];
::[<L4Cvtr SS7 Variant/ID>]:<COUNT=int>;
Attribute Details
COUNT - Message Rules
Permissions: Read-only
Type: int
Description: Number of Message Rules
Level 4 Converter Message Rule
VFY-L4CVTR-MSGRULE
VFY-L4CVTR-MSGRULE::[<L4Cvtr SS7 Variant/ID>]-[<Message Rule/Message ID>]:[CTAG];
DLT-L4CVTR-MSGRULE
DLT-L4CVTR-MSGRULE::[<L4Cvtr SS7 Variant/ID>]-[<Message Rule/Message ID>]:[CTAG];
ADD-L4CVTR-MSGRULE
ADD-L4CVTR-MSGRULE::[<L4Cvtr SS7 Variant/ID>]-[<Message Rule/Message ID>]:[CTAG]:::::[ACTION=<MsgAction>],[DESC=<string>],[SI=<UPClassValue>];
CHG-L4CVTR-MSGRULE
CHG-L4CVTR-MSGRULE::[<L4Cvtr SS7 Variant/ID>]-[<Message Rule/Message ID>]:[CTAG]:::::[ACTION=<MsgAction>],[DESC=<string>],[SI=<UPClassValue>];
::[<L4Cvtr SS7 Variant/ID>]-[<Message Rule/Message ID>]:<MSGID=int>,<ACTION=MsgAction>,<DESC=string>,<SI=UPClassValue>;
AID Description
Message ID - Position 1
Type: int
Description: Message Rule message identifier as per SS7 specifications.
Attribute Details
MSGID - Message ID
Permissions: Createable
Type: int
Description: Message Rule message identifier as per SS7 specifications.
ACTION - Action
Permissions: Writeable and Createable
Type: MsgAction={DISCARD,PASS THROUGH,PROCESS,CPAM}
Description: Message Rule Action (DISCARD/PASS THROUGH/PROCESS/CPAM). Message rules necessary to the conversion must be set on initial setup via the SS7 Variant object Load Default Rules action once both SS7 Variants are set. The message rule action applies to all MSUs with the matching SI and ID received by the associated SS7 Variant. If no message rule is found for an incoming MSU, the default action is PASS THROUGH. The default rules apply may be enhanced as required by the network deployment or the national variant. Set the action to DISCARD to discard the matching MSUs. Set the action to PASS THROUGH to forward the matching MSUs with no additional conversions beyond the routing label and no parameter rules are applied. Set the action to PROCESS to trigger pre-defined conversion and apply parameter rules to matching MSUs. The CPAM action is reserved for SS7-IP deployments to encapsulate the matching MSUs to the IP network.
DESC - Description
Permissions: Writeable and Createable
Type: string
Description: Message Rule description.
SI - SI
Permissions: Writeable and Createable
Type: UPClassValue={ISUP,SCCP}
Description: Message Rule signaling indicator (ISUP/SCCP).
Level 4 Converter Parameter Rules
VFY-L4CVTR-PARMRULES
VFY-L4CVTR-PARMRULES::[<L4Cvtr SS7 Variant/ID>]:[CTAG];
::[<L4Cvtr SS7 Variant/ID>]:<COUNT=int>;
Attribute Details
COUNT - Parameter Rules
Permissions: Read-only
Type: int
Description: Number of Parameter Rules
Level 4 Converter Parameter Rule
VFY-L4CVTR-PARMRULE
VFY-L4CVTR-PARMRULE::[<L4Cvtr SS7 Variant/ID>]-[<Parameter Rule/Parameter ID>]:[CTAG];
DLT-L4CVTR-PARMRULE
DLT-L4CVTR-PARMRULE::[<L4Cvtr SS7 Variant/ID>]-[<Parameter Rule/Parameter ID>]:[CTAG];
ADD-L4CVTR-PARMRULE
ADD-L4CVTR-PARMRULE::[<L4Cvtr SS7 Variant/ID>]-[<Parameter Rule/Parameter ID>]:[CTAG]:::::[ACTION=<ParmAction>],[DESC=<string>],[SI=<UPClassValue>];
CHG-L4CVTR-PARMRULE
CHG-L4CVTR-PARMRULE::[<L4Cvtr SS7 Variant/ID>]-[<Parameter Rule/Parameter ID>]:[CTAG]:::::[ACTION=<ParmAction>],[DESC=<string>],[SI=<UPClassValue>];
::[<L4Cvtr SS7 Variant/ID>]-[<Parameter Rule/Parameter ID>]:<PARMID=int>,<ACTION=ParmAction>,<DESC=string>,<SI=UPClassValue>;
AID Description
Parameter ID - Position 1
Type: int
Description: Parameter Rule parameter identifier as per SS7 specifications.
Attribute Details
PARMID - Parameter ID
Permissions: Createable
Type: int
Description: Parameter Rule parameter identifier as per SS7 specifications.
ACTION - Action
Permissions: Writeable and Createable
Type: ParmAction={DISCARD,PASS THROUGH,PROCESS,CPAP}
Description: Parameter Rule Action (DISCARD/PASS THROUGH/PROCESS/CPAP). Parameter rules necessary to the conversion must be set on initial setup via the SS7 Variant object Load Default Rules action once both SS7 Variants are set. The parameter rule action applies to parameters with the matching SI and ID in MSUs with a correlated PROCESS Message Rule received by the associated SS7 Variant. If the Message Rule action is not set to PROCESS, the parameter, if present, is forwarded with no modification. If no parameter rule is found for a PROCESS MSU, the default action is PASS THROUGH. The default rules apply may be enhanced as required by the network deployment or the national variant. Set the action to DISCARD to discard the matching parameter. Set the action to PASS THROUGH to forward the matching parameter with no modification. Set the action to PROCESS to trigger pre-defined conversion. The CPAP action is reserved for SS7-IP deployments to encapsulate the matching parameters to the IP network.
DESC - Description
Permissions: Writeable and Createable
Type: string
Description: Parameter Rule description.
SI - SI
Permissions: Writeable and Createable
Type: UPClassValue={ISUP,SCCP}
Description: Parameter Rule signaling indicator (ISUP/SCCP).
