The DSC SWe listens to TCP/IP network ports as shown in the following tables. Some of these ports are not available if the corresponding product features are not configured.
Note
The actual ports to which the DSC SWe listens depends on the system configuration. You can set ports based on your network configuration and requirement.
DSC SWe Management Ports
| Protocol | Network Port | Usage | Notes |
|---|---|---|---|
| TCP | 22 | DSC - SP2000 application CLI through SSH | Application CLI over SSHv2 |
80 | Web UI redirection to port 443 | HTTP server redirects a browser to port 443 for HTTPS. | |
443 | DSC - SP2000 application GUI management interface through HTTPS | ||
3868 | Linux SFTP access through SSH |
DSC SWe Media Physical Ports at Signaling Port IP Addresses
| Protocol | Network Port | Usage | Notes |
|---|---|---|---|
TCP | 3868 | Diameter signaling over TCP | Listen port is configurable; 3868 is the default. |
3868 | Diameter signaling over TLS over TCP | Listen port is configurable; 3868 is the default. | |
| SCTP | 5658 | Diameter signaling over SCTP | Listen port is configurable; 5658 is the default. |
| Encapsulating Security Payload (ESP) | N/A | IPsec ESP | ESP terminates on signaling address when IPsec is used in IMS access mode. |
Overview
Content Tools