In this section:

Configuring Command Lists

The Command Lists are instructions on how to modify the digits of the SCCP Called or Calling Party Address, depending on extra requirements to route the message.

The Digits attribute on the GT Modification replaces the full digits in the address. The Command Lists are used to insert, delete, or truncate digits in the Digits attribute field. The Command List is an optional reference in a GT Modification.

You can search through the Command List table by selecting the following criteria on the Command List Filter screen (see the following figure):

  • Command List Name - displays the Command List that has the specified Name
  • Command List Name Prefix - displays the Command Lists that start with the specified Name prefix
  • Recently Created - displays the last Command List that you created
  • All - displays all Command Lists
  • Description Substring - find all Command Lists with a Description containing the provided case insensitive substring

For more information about filtering, refer to Filtering.

Command Lists Filter Screen

To create a Command List

  1. From the Main Menu, click GTT.
  2. Click Workspace DB (cannot create on Live DB).
  3. Click Command Lists.
  4. Click Create Command List.

  5. Configure the required attributes.

    Tip

    The Command List Name attribute is defined with a maximum of 16 characters (case insensitive) consisting of alphanumeric, underscore, or dash characters. The name cannot start with the reserved word: unset.

  6. Click Continue.
Tip

To delete a Command List, click the Delete button "Χ" in the same line that the Command List you want to delete appears.

Caution

If the Command List is referenced by a GT Modification, then you cannot delete the Command List.

To Configure a Command List

  1. From the Main Menu, click GTT.
  2. Click Workspace DB | Live DB.
  3. Click Command Lists.
  4. Click the required Command List.


  5. Configure the attribute.                 
  6. Click Continue.

Configuring Command List Records

Each Command List must have one or more Command List Records.

To create a Command List Record

  1. From the Main Menu, click GTT.
  2. Click Workspace DB (cannot create on Live DB).
  3. Click Command Lists.
  4. Click the required Command List.
  5. Click Create Command List Record.
  6. Configure the required attribute.

  7. Click Continue.

    Tip

    To delete a Command List Record, click the Delete button "Χ" in the same line that the Command List Record you want to delete appears.

    Caution

    When you delete the last Command List Record, the Command List that contains this record is also deleted.

    If a Command List is referenced by a GT Modification, deleting the last Command List record fails.

To  configure a Command List Record

  1. From the Main Menu, click GTT.
  2. Click Workspace DB | Live DB (only view on the Live DB).
  3. Click Command Lists.
  4. Click the required Command List.
  5. Click the required Command List Record.
  6. Configure the required attributes.
  7. Click Continue.