Note

The following section is only applicable to the DSC 8000, the DSC SWe (on MA-RMS), the Signaling Platform 2000 (SP2000), and the virtual SP2000 (on MA-RMS).

If you set the Confirmation Required attribute on the NA STP Configuration screen to ENABLED (refer to Configuring STP Attributes), a confirmation request message appears when the last link in a linkset is deactivated. This message appears regardless whether the linkset contained the same type or various types of links in this linkset. If you, in fact, want to deactivate the last link in the linkset, you have to click the Deactivate button one more time.

Caution

Deactivating a Low-speed Link should be done with care, because performing this action may be service affecting.

Note

If you deactivate a Low-speed Link to perform a configuration task, make sure to reactivate this link after you completed the task.

  1. From the Main Menu, click MTP3.

  2. Click the required NA.

  3. Click Linksets.

  4. Click the required linkset.

  5. Click the required LS Link.

  6. Click Activate or Deactivate.

 

  • No labels