In this section:
Use the Local Record - Data window to create and work with the data associated with a local DNS record. Local DNS resource records are associated with a particular address context and DNS group and are used to locally resolve an FQDN rather than querying an external server. Configure the basic parameters of a local record on the Local Record window. Then use the Local Record - Data window to configure one or more data entries for the local DNS resource record. Each data ntry must have a unique index.
When using the dnsGroup LOCAL resolution, you cannot configure more than four active T-SBCs/M-SBCs since the DNS Group LOCAL entries are limited to a maximum of four entries. If you need to enable more than four active T-SBCs/M-SBCs, use an external DNS for resolution.
On the SBC main screen, go to Configuration > System Provisioning > Category: Base Provisioning > DNS > Servers > DNS > DNS Group > Local Record > Data or
All > Address Context > DNS Group > Local Record > Data
The Data window is displayed. Use the Address Context, DNS Group, and Local Record drop-down lists to filter the list.
To create a data entry to associate with a local DNS resource record, you must first specify the address context, DNS group, and local record with which you want to associate the data. To create a new data entry for a local DNS resource record:
Click New Data. The Create New Data window is displayed.
Use the following table to configure the options and then click Save.
|
|
---|---|
Index | A unique index value for the data entry. |
Type | The record type for the data entry. The options are:
|
Priority | The priority for the data entry, O to 100. The default is 0. |
IP Address V4 or V6 | The IPv4 or IPv6 address for the data entry. |
State | Administrative state for the data entry:
|
To edit a data entry for a local DNS record object:
To copy a data entry for a local DNS record object and make changes to the copy:
To delete a data entry for a local DNS record object: