In this section:

Related articles:

Use this profile to configure the SBC SWe active profile name using the built-in standard profiles.

Note

When the SBC is deployed in a 1:1 scenario and registered with the RAMP, you must only configure the SWe Configuration Profiles through the RAMP or EMA.


Note

This feature is only applicable when four or more vCPUs are configured. 

Note

An active profile cannot be deleted.

Service Impacting:

The active system (and standby system in HA configuration) system is rebooted. All active calls are lost during this process.

Standard profiles make some assumptions regarding the traffic model and, hence, may not be the optimal profile for the deployment of an I-SBC. To get the maximum capacity, create a custom traffic profile that matches the actual traffic input to the I-SBC. Refer to SWe Traffic Profiles - CLI.


For SBC SWe cloud-based deployments, the profiles are automatically configured based on the personality. Auto-configuring a profile prevents reboot during instantiation. The following table represents the SBC SWe automatic configuration:

Personality Type

Profile Name

I-SBCdefault
S-SBCstandard_signaling_profile
M-SBCstandard_msbc_profile


Command Syntax

The system sweActiveProfile CLI syntax is shown below.

% set system sweActiveProfile name <profile name>
	default 
	standard_callmix_profile 
	standard_msbc_profile 
	standard_passthrough_profile 
	standard_signaling_profile 
	standard_transcoding_profile
	standard_highcps_callmix_profile


Command Parameters

The following table lists and describes the standard profiles. 

Profile

Description

defaultBy default, non-cloud I-SBC instances use the default profile. This profile supports a call mix containing a combination of 98% pass-through and 2% transcoding.
standard_callmix_profile

This profile supports a call mix containing a combination of 90% pass-through and 10% transcoding calls.

standard_msbc_profile

This profile is auto-configured on cloud-based M-SBC instances.This profile utilizes the vCPUs for pass-through calls.

standard_passthrough_profile

This profile utilizes the vCPUs primarily for pass-through calls.

standard_signaling_profileThis profile utilizes the vCPUs for signaling (direct media) calls, and is auto-configured on cloud-based S-SBC instances.
standard_transcoding_profileThis profile utilizes the vCPUs for transcoding calls.
standard_highcps_callmix_profile

This profile is similar to the standard passthrough profile, but with higher CPS.


Command Example

Activate the standard_transcoding_profile as the active traffic profile. 

set system sweActiveProfile name standard_transcoding_profile 
commit

The following warnings were generated:
'system sweActiveProfile': To Activate the Profile system will be rebooted.All active calls will be lost during this process. Do you wish to continue?
Proceed? [yes,no]yes
Note

For information on how to activate a custom GPU profile, refer to the section "Configure GPU I-SBC on Openstack" section of the page Configuring SBC SWe in OpenStack Cloud Environment for GPU Transcoding.