You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Use this object to configure various metrics/parameters related to Call Admission Controls on the ingress leg.

On the SBC main screen, navigate to All > Address Context > Zone > Gw Trunk Group > CAC > Ingress.

  1. The Ingress window is displayed.

    Ingress - Edit Ingress

  2. Select Address Context, Zone and Gw Trunk Group from their respective drop-down lists.
  3. The Edit Ingress window is displayed.
  4. Make necessary changes and click Save. Click Clear to cancel the changes.

The parameters displayed on the Edit Ingress window are:

Edit Ingress - Parameter Description Table

ParameterDescription
Call LimitTotal number of concurrent calls (0-2147483647, or unlimited) allowed on the ingress leg. (default=unlimited)
Emergency OversubscriptionThe percentage (0-1000) of resource oversubscription allowed for emergency calls. (default=10)
Hpc OversubscriptionThis parameter specifies the amount of resource over-subscription (0-100), as a percentage, that are allowed for HPC. When the baseline call limit and bandwidth limit are reached, normal calls are not admitted, but additional HPC are allowed up to the configured percentage value. (default=10)
Call Rate Max

Maximum sustained ingress call rate (SBC 5000: 1-450, or unlimited; SBC 7000: 1-1350, or unlimited) allowed in calls per second. (default=unlimited)

Call Burst Max

Maximum allowed burst size (SBC 5000: 1-900, or unlimited; SBC 7000: 1-2700, or unlimited) above the allowed sustained rate for ingress call attempts, in calls per second. (default=unlimited)

Note: You can set both Call Burst Max and Call Rate Max as unlimited; however, if you assign a value to one parameter, the other must also be assigned a value.

Note

Call policing, using Call Rate Max and Call Burst Max, is applicable only to normal and emergency calls, and not to high priority calls (HPC).

 

  • No labels