PoE is used to transmit power along with data over standard twisted-pair cable. This is useful for powering IP telephones, wireless LAN access points, and other devices that would be inconvenient to supply power separately. There are global and port settings that can be configured in this page along with port PoE status information.
Choose Switch > PoE Config.
Configure settings using the information in the following table as a guide.
Select the Enable Reset PoE checkbox to allow the IP phones to register in sync with system network configuration.
- Observe current power levels in the Power Reservation table.
- Allocate power to individual ports:
- Select the checkbox for each port that you want to manage.
Choose a power priority for the chosen port from the Priority drop-down list:
High
Medium
Low
In the Allocation (W) field for the chosen port, enter the power allocation in watts.
- Click Submit to save your settings.
Overview
Content Tools