The Mgmt Port Status window provides a list of the management ports which are currently used by the server along with their MAC addresses, status, and statistics.
From the SBC main screen, navigate to Monitoring > Dashboard > Ports > Ethernet Port > Mgmt Port Status or
Monitoring > System > Category: Hardware Status > Ports > Ethernet Port > Mgmt Port Status
All > System > Ethernet Port > Mgmt Port Status
The Mgmt Port Status window displays.
Figure 1: Mgmt Port Status
The following output is displayed:
Table 1: Mgmt Port Status parameters
| Parameter | Description |
|---|---|
| CE Name | The SBC server name |
| Port Name | The name of this port |
| If Index | The unique If index of this management NIF |
| Mac Address | The MAC address of the network interface |
| Negotiated Speed | Specifies the negotiated interface speed in Mbps. |
| Link State | The state of the interface |
| Duplex Mode | Specifies the negotiated interface duplex mode. The options are:
|
| Rx Actual Bandwidth | Specifies the actual received bandwidth in use on this port in bytes/second. |
| Tx Actual Bandwidth | Specifies the actual transmitted bandwidth in use on this port in bytes/second. |
| Rx Packets | The number of received packets |
| Tx Packets | The number of transmitted packets |
| Rx Errors | The number of bad packets received |
| Tx Errors | The number of packet transmit failures |
| Rx Dropped | The number of packets dropped due to no receive buffers |
| Tx Dropped | The number of packets dropped due to no transmit buffers |
Overview
Content Tools