DO NOT SHARE THESE DOCS WITH CUSTOMERS!

This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.


This object is used for Call Reservation object to reserve a portion of the resources for specific call direction or type for the specified Gw Trunk Group.

To View and Edit Call Reservation

On SBC main screen, navigate to All > Address Context > Zone > Gw Trunk Group > Call Reservation

The Call Reservation can be checked for each Address Context, Zone, and Gw Trunk Group or for all the Address Contexts, Zones, and Gw Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone, and Gw Trunk Group.

The Call Reservation window is displayed.

All - Address Context - Zone - Gw Trunk Group - Call Reservation

 

The following fields are displayed:

Call Reservation Parameters

ParameterDescription

Inbound

The percent of channels reserved for inbound calls in IP gateway trunk groups. Must be 0-100, in increments of 5. Default is 0.

State

The administrative state of the packet outage:

  • disabled (default)
  • enabled

Priority Call

The number of priority call resources (circuits or IP calls) to be reserved for this trunk group. Must be 0-100, default is 1.

Incoming Call

The number of incoming call resources (circuits or IP calls) to be reserved for this trunk group. Must be 0-128, default is 1.

Outgoing Call

The percentage of outgoing call resources (circuits or IP calls) to be reserved for this trunk group.

This percentage is applied to the total number of circuits less the circuits reserved for incoming calls less the circuits reserved for priority calls. Must be 0-100, default is 10%.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.


Additional topics in this section: