DO NOT SHARE THESE DOCS WITH CUSTOMERS!

This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.


The SBC Core provides a wide range of high density digital signal processor (DSP) modules and a comprehensive set of converged, voice, video, vocoder, fax and data media processing functions. This section describes the possible DSP density values on SBC 5000 series devices (5110, 5210, 5400) and the SBC 7000 device according to their DSP module configurations.


Note

Not applicable to the SBC Software Edition (SWe).

Note

Channel densities of the SBC 7000 are dynamically determined according to resources (MIPS and memory) required by particular codecs in use. The SBC 5110, 5210, and 5400 platforms use DSP2x modules.

Comparison of SBC DSP Modules

The SBC 5110, 5210, and 5400 platforms use DSP2x modules. The number of transcoded sessions supported on the DSP2x modules varies by codec. Available platform bandwidth may also limit sessions depending on packet size. The SBC 7000 platform uses the high density DSP-LC type of modules.

The table below describes the card differences and associated platforms.

SBC Core DSP Models Per Platform


DSP25DSP20DSP-LC
SBC Platform

SBC5210

SBC5110

SBC 5400

SBC5210

SBC5110

SBC 5400

SBC 7000

Customer Installable(tick)(tick)(tick)

Maximum number of cards per platform

 4 14
 Hot-swappable(tick)(tick)(tick)
Note

Mixing DSP20 and DSP25 cards (both within a chassis and between active/standby servers in HA scenario) is not supported.
For example, if SBC-A contains DSP25 in slot 1-3, SBC-B must also have a DSP25 in slots 1-3. As another example, if SBC-A has a DSP20 in slot 1, SBC-B must not have anything other than a DSP20 in slot 1.

Additional topics in this section: