RAMP support only

Beginning with SBC Core release 12.0, the SBC interoperates with the Ribbon Application Management Platform (RAMP), replacing the Insight EMS.

However, the EMA, CLI and API will continue to include EMS-labeled parameters and screens to facilitate SBC migrations from older releases. Accordingly, any references to "EMS" in this documentation apply to the RAMP platform.

In this section:

Related articles:

Use the "Ems IP Address Override" window to specify an IP address that the SBC must use for RAMP registration. These changes override any other previously configured EMS registration settings. You can specify up to 8 override addresses.

This configuration applies and is visible only in SBC SWe virtualized deployments.

To View the RAMP IP Address Override List

On the SBC main screen, go to All > System > Ems> Ems IP Address Override

The Ems IP Address Override window opens. 

Figure 1: Ems IP Address Override window

To Create a RAMP IP Address Override Entry

To specify an IP address to use as an override RAMP IP address:

  1. Click New Ems IP Address Override. The "Create New Ems IP Address Override" window opens. 

  2. In Ems IP Address, enter the IP address.

  3. Click Save. You must reboot the SBC for the change to take effect.

To Delete a RAMP IP Address Override Entry

  1. Select the Ems IP Address Override entry by clicking the radio button adjacent to it.

  2. Click the Delete symbol (X) at the end of the row.

  3. Confirm the deletion when prompted.


You cannot edit or copy an existing Ems IP Address Override entry.