In this section:
This section specifies the carrier information parameters
To View and Edit Carrier Information
On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Ip Signaling Profile > Ingress Ip Attributes > Carrier Information. The Carrier Information window is displayed.
DEFAULT_H323
On the Carrier Information window, choose the Ip Signaling Profile as DEFAULT_H323 to view the Carrier Information for H323 Trunk Group.
Figure 1: Trunk Provisioning - Ingress Ip Attributes - Carrier Information
There are no Carrier Information parameters for DEFAULT_H323 type of Ingress Ip Attributes.
DEFAULT_SIP
On the Carrier Information window, choose the Ip Signaling Profile as DEFAULT_SIP to view the Carrier Information parameters for SIP Trunk Group.
Figure 2: Trunk Provisioning - Ingress Ip Attributes - Carrier Information
The following fields are displayed:
Table 1: Ingress Ip Attributes - Carrier information
Parameter | Description |
|---|---|
Generate Terminating Ca | Use this flag on the ingress SIP side to decide whether to interwork the terminating CA data from ISUP to SIP 18x messages. When enabled, the SBC maps the terminating CA data from ISUP to SIP 18x messages. When disabled, the SBCdoes not map the terminating CA data from ISUP to SIP 18x messages. The options are:
|
Generate Terminating Cic | Use this flag on the ingress SIP side to decide whether to interwork the terminating CIC data from ISUP to SIP 18x messages. When enabled, the SBC maps the terminating CIC data from ISUP to SIP 18x messages. When disabled, the SBCdoes not map the terminating CIC data from ISUP to SIP 18x messages. The options are:
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools