You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

About this Resource

Modified: for 1.3.0

Defines a Message Translation Entry resource to describe a given [Message Translation Table.

REST API Methods for this Resource

Resource Schema

Configuration

Parameter Name Required Service Affecting Data Type Default Value Possible Values Description
ConfigIEStateNoYesEnum1Possible values:
  • 0 - esDISABLED
  • 1 - esENABLED
Specifies the Administrative State of the resource.
DescriptionNoNostringnone64 - Max Length Short description of the translation.
InMsgTypeYesYesEnum0Possible values:
  • 0 - imtProgress
  • 1 - imtAlert
  • 2 - imtConnect
  • 3 - imtProceeding
 Specifies the incoming message type to be matched and translated.
  • Connect
    - For this option, the Incoming Message, IE Type must be Facility, and the Outgoing Message, IE must be Untranslated or Not Present.
  • Proceeding, Progress, Alert
    - For these options Incoming Message, IE Type must be Progress Indicator only.
InIETypeYesYesEnum0Possible values:
  • 0 - iitPI
  • 1 - iitDontCare
  • 2 - iitFacility
 Specifies the Information Element (IE) type to be matched and translated.
  • Progress Indicator
    - This option specifies that a progress indicator is present.
  • Don't Care - This option specifies that a Progress Indicator is present or not is not a concern.

    This option only applies to Progress message types.

  • Facility
    - This option disables all the following Progress Indicator related matching rules.

    This option only applies to Connect message types.

InPIPresentYesYesEnum1Possible values:
  • 0 - btFalse
  • 1 - btTrue
 Specifies if the Progress Indicator (PI) is present in the message.
  • Yes
    - Progress Indicator is present in the message.
  • No
    - Progress Indicator must not be present in the message.
InPISelectionYesYesEnum1Possible values:
  • 0 - pstAny
  • 1 - pstFiltered
 Specified if messages are filtered by Progress Indicator (PI) values.
  • Any
    - This option does not filter messages by their Progress Indicator value, so any PI value is matched.
  • Selected
    - This option filters messages by specific Progress Indicator values, selected in the following Progress Indicators field.
InPiValueYesYesint2Possible values:
  • 0 - Minimum
  • 127 - Maximum
 Bitmask of one or more progress indicator values in the incoming message to match:
  • 0
    - If the PI is NOT present. InPIPresent is set to No.
  • 1
    - Not end to end ISDN
  • 2
    - Destination not ISDN
  • 4
    - Origination is not ISDN
  • 8
    - Call return to ISDN
  • 16
    - Interworking Encountered
  • 32
    - Inband information
  • 64
    - Delay Encountered
Example: If InPiValue is 7 the system will match message with 3 different PI: Not end to end ISDN (1) or Destination is not ISDN (2) or Origination is not ISDN (4)
EarlyMediaStatusYesYesEnum0Possible values:
  • 0 - emsAny
  • 1 - emsNegotiated
  • 2 - emsNotNegotiated
 Specifies how to handle early media status.
  • Any
    - Specifies that early media status is not considered.
  • Negotiated
    - Specifies that early media status is negotiated.
  • Not Negotiated
    - Specifies that early media status is not negotiated.

    This option is available when the Incoming Message, Message Type is Progress or Alert.

OutMsgTypeYesYesEnum0Possible values:
  • 0 - omtProgress
  • 1 - omtAlert
  • 2 - omtConnect
  • 3 - omtProceeding
Specifies the type of the outgoing translated message.
OutIETypeYesYesEnum4Possible values:
  • 0 - oitUntranslated
  • 1 - oitNotPresent
  • 2 - oitPresent
  • 3 - oitNotEndtoEndISDN
  • 4 - oitDestinationNotISDN
  • 5 - oitOriginNotISDN
  • 6 - oitReturnToISDN
  • 7 - oitInterworkingEncountered
  • 8 - oitInbandInfo
  • 9 - oitDelayEncountered
 Outgoing translated Information Element (IE). The outgoing IE type is the same as the incoming IE Type.
  • Present
    - This option means present with any value and is generally used for SIP with SDP.

    If Facility is selected for Incoming Message, IE Type, the Outgoing, IE can only be Untranslated or Not Present.

SendMessageYesYesEnum0Possible values:
  • 0 - smtYes
  • 1 - smtNo
  • 2 - smtNoOnSubsequent
  • 3 - smtNoOnCutThrough
 Specifies when an outgoing message is sent.
  • Yes
    - Send message
  • No
    - Ignore message (no message is sent)
  • No on Subsequent
    - Ignore message if same message has already been sent
  • No on Cut Through
    - Ignore message if early media being played

    When No is selected, all the following fields are disabled.

MediaCutthroughTypeYesYesEnum0Possible values:
  • 0 - mctYesOnEarlyMedia
  • 1 - mctYes
  • 2 - mctNo
Specifies the use of cut through media. When SBC receives PROCEEDING message it cuts through media by default regardless of PI presence.
  • No labels