You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

In this section:

 

Overview

The

Unable to show "metadata-from": No such page "_space_variables"
relays the INVITE requests it receives. Egressing INVITE may/may not have SDP depending on presence of SDP in the received INVITE and late offer interworking configuration.
Unable to show "metadata-from": No such page "_space_variables"
inserts Allow header containing the following methods: INVITE, ACK, CANCEL, BYE, REGISTER, REFER, INFO, SUBSCRIBE, NOTIFY, PRACK, UPDATE, MESSAGE, PUBLISH and OPTIONS. There are configurable options for the support of REFER, SUBSCRIBE, NOTIFY, OPTIONS, MESSAGE, PUBLISH and INFO, and when these methods are configured as not supported, these methods are not added in the Allow header.

The

Unable to show "metadata-from": No such page "_space_variables"
adds a Supported header containing the following extensions: "100rel", "timer" and "path" extensions. Addition of “100rel”, “timer” and “path” extensions is configurable. As a part of RCS support,
Unable to show "metadata-from": No such page "_space_variables"
relays “Require” header with “recipient-list-invite” option-tag.

The

Unable to show "metadata-from": No such page "_space_variables"
can be configured to transparently pass the “From’ and “To” headers from ingress to egress call-leg. Additionally, for access deployments,
Unable to show "metadata-from": No such page "_space_variables"
can be configured to use Username in the To header instead of the Request-URI, while terminating calls to IP-PBX.

The

Unable to show "metadata-from": No such page "_space_variables"
supports processing or relaying the ‘replaces header’ received in the incoming SIP request. This done based on the ‘Relay Replaces Header flag’ in SIP service on SBC. If
Unable to show "metadata-from": No such page "_space_variables"
is configured to process INVITE with Replaces locally and if the dialog doesn’t exist, the INVITE is rejected with 481 response. SBC processes INVITE with Replaces locally only on confirmed dialogs.

The

Unable to show "metadata-from": No such page "_space_variables"
supports reception of INVITE with and without SDP Offer.

  • If the INVITE is received with SDP offer,
    Unable to show "metadata-from": No such page "_space_variables"
    sends the SDP Answer in the first reliable provisional response or in success final response.
  • If the initial INVITE does not contain an SDP offer, the
    Unable to show "metadata-from": No such page "_space_variables"
    sends the SDP offer in the first reliable 18x or 200 OK response and the answer is expected in PRACK or ACK method (asappropriate).
Even though
Unable to show "metadata-from": No such page "_space_variables"
sends Allow and Supported headers by default in the outgoing INVITE, it does not discard an incoming INVITE if these headers are NOT present.

INVITE Support

The

Unable to show "metadata-from": No such page "_space_variables"
supports sending SIP INVITE requests to establish VoIP calls. When a User Agent Client (UAC) desires to initiate a session (for example, audio, video, or a game), it formulates an INVITE request. The INVITE request asks a server to establish a session. This request may be forwarded by proxies, eventually arriving at one or more User Agent Servers (UASs) that can potentially accept the invitation. These UASs will frequently need to query the user about whether to accept the invitation. After some time, those UASs can accept the invitation (meaning the session is to be established) by sending a 2xx response.

If the invitation is not accepted, a 3xx, 4xx, 5xx or 6xx response is sent, depending on the reason for the rejection. Before sending a final response, the UAS can also send provisional responses (1xx) to advise the UAC of progress in contacting the called user.

Sending an INVITE request within an existing dialog to change addresses or ports, add or delete a media stream, and so forth is known as a re-INVITE.

reINVITE Handling

Reference: RFC 6141

The

Unable to show "metadata-from": No such page "_space_variables"
does not provide any interworking between an error response and 200 (OK) for a reINVITE.

reINVITE Handling  by UAS

No state changes are performed in

Unable to show "metadata-from": No such page "_space_variables"
if a reINVITE is rejected by the downstream entity.

The

Unable to show "metadata-from": No such page "_space_variables"
supports the following UAS behavior for a call which is set up with only an audio stream:

  • When a reINVITE is received adding a video stream (SDP has both audio and video components), and if the reINVITE is rejected by the downstream entity, the audio stream remains intact and is still active.

    Call Flow Example

  • When a reINVITE is received adding a video stream and also updating the IP address for the audio stream (SDP has both audio and video components), and if the corresponding reINVITE on the other leg is rejected by the downstream entity,

    Unable to show "metadata-from": No such page "_space_variables"
    continues to use the old IP address for the audio stream.

    Call Flow Example

  • When a reINVITE is received adding a video stream and also updating the IP address for the audio component (SDP has both audio and video components), and if the corresponding reINVITE on the other leg is replied with 200 (OK), but video component has port=0.

    Unable to show "metadata-from": No such page "_space_variables"
    replies with 200 (OK), video stream is not created and the new IP address is used for audio.

    Call Flow Example

  • When the
    Unable to show "metadata-from": No such page "_space_variables"
    receives a reINVITE to add a video stream but does not have enough bandwidth to do so,
    Unable to show "metadata-from": No such page "_space_variables"
    generates a 200 (OK) response with port=0 for video stream.

  • The
    Unable to show "metadata-from": No such page "_space_variables"
    does not propagate a reINVITE/UPDATE to the other leg if it does not change any characteristics (e.g. codec, digit transfer mode) in the existing streams on the other leg.

  • When an egress server changes the SDP from 18x message to 200 OK message (which is a violation of RFC 3261),
    Unable to show "metadata-from": No such page "_space_variables"
    interworks by sending the last sent SDP in 200 OK and then sends a RE-INVITE to correct the SDP. This Re-INVITE can cause problems if the INVITE/Re-INVITE is challenged for authentication or because the endpoints change Secure Real-Time Transport Protocol (SRTP) keys for every new SDP offer. In these scenarios,
    Unable to show "metadata-from": No such page "_space_variables"
    is enhanced to update the SDP in 200 OK itself.

UAC Behavior

The

Unable to show "metadata-from": No such page "_space_variables"
does not generate a reINVITE/UPDATE upon receipt of an error response for a reINVITE. It is assumed that downstream entity is RFC6131 compliant and keeps session characteristics the same as before the rejected reINVITE transaction.

Glare Situations

The

Unable to show "metadata-from": No such page "_space_variables"
replies with 491 (Request Pending) if a reINVITE is received while a previous one is still pending.

 

Clarifications on Canceling re-INVITEs

When canceling reINVITES, the

Unable to show "metadata-from": No such page "_space_variables"
always replies with 487 (Request Terminated).

Refreshing a Dialog’s Target and its Subsections

The SBC supports refreshing a dialog's target and its subsections as well as updating remote target based on an unreliable response.

  • No labels