In this Section:

Note

This object is visible and configurable only for SBC SWe Cloud. Refer to Configuring an SBC SWe Cluster using the EMS for information on configuring SWe Cloud deployments.

The SBC SWe Cloud supports configuring a Load Balancing Service (LBS) to distribute cluster information between D-SBC instances. 

To configure an LBS on a PKT port (any IP Interface other than MGMT), set "clusterAdmin clusterComm type ip" before the LBS configuration on an M-SBC. Refer to Intra-Cluster VNFC Communication Through Packet Ports.

Configuring Load Balance Service

On the navigation pane:

  1. click All > System > Load Balancing Service.

    Load Balancing Service - M-SBC

    Load Balancing Service - S-SBC

  2. Use the table to edit the configurations and click Save.

Parameter Descriptions

Parameter Descriptions

ParameterDescription
Group NameDomain name of the load balancing group.
Private IP Interface Group NameThe name of the Private IP Interface Group used by an M-SBC or T-SBC to communicate with the MRF.

Invite Retarget Mode

Specifies the load balancing service mode for INVITEs. Enables load balancing for initial INVITE requests. 

If set to redirect, calls may get retargeted using SIP 302 to balance the load.

  • Disabled (default)
  • Redirect

Register Retarget Mode

Specifies the load balancing service mode for REGISTERs. Enables load balancing for REGISTER requests.

If set to redirect, new registrations may get retargeted using a SIP 302 message to balance the load.

  • Disabled (default)
  • Redirect

  • No labels