SBC 5400 - Installation Sequence

This following diagram shows a high-level flow of the 

SBC 5400 Install Flowchart

Click a link below to go to an installation task based upon your SBC type and configuration options:

1. Rack mount the chassis:
   1. Rack Mounting the SBC 5400 Chassis
2. Connect Ethernet and data cables:
   1. Connecting SBC 5400 Ethernet and Data Cables
3. Connect power to SBC and power on:
   1. Connecting Power to SBC 5400 and Powering On

4. Upgrade BMC firmware (if required):

   Since, this is a fresh installation, BMC firmware upgrade is not required.

5. Configure SBC platform (BMC, management interfaces, NTP): SBC 5400 - Configuring the Platform.
6. Install SecureLink for Remote Access SBC 5400 - Installing SecureLink for Remote Access.
7. Install
   Unable to show "metadata-from": No such page "_space_variables"
   Application. SBC 5400 - Installing Application.
8. Configure 
   Unable to show "metadata-from": No such page "_space_variables"
   for a basic call flow and make first call. Refer to the procedure mentioned in How to Set up a Basic Call Flow.