You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

In this section:

Related articles:

 

This object creates and configures a Call Admission Control (CAC) profile providing the ability for each SIP registered or static endpoint to have individualized limits on the number of active calls, bandwidth size, call rates, over-subscription amounts, burst sizes, etc.

To calculate fill rate and bucket size, refer to Token Bucket Policers page.

SIP CAC Profile

Command Syntax

% set profiles sipCacProfile <profile_name>
	aggregateMessage
	bandwidthLimit
	bandwidthLimitThreshold
	bandwidthVideoThreshold
	callEgressAggregateEmergencyPreference
	callEgressAggregatePreference
	callEgressBurstSize
	callEgressEmergencyPreference
	callEgressRate
	callEgressRatePeriod
	callIngressAggregateEmergencyPreference
	callIngressAggregatePreference
	callIngressBurstSize
	callIngressEmergencyPreference
	callIngressRate
	callIngressRatePeriod
	callLimit
	callLimitEgress
	callLimitIngress
	callLimitThreshold
	dblAggregateRej
	emergencyOversubscription
	emergencyOversubscriptionEgress
	emergencyOversubscriptionIngress
	extendedEmergencyIpLimit 
	extendedEmergencyIpLimitEgress 
	extendedEmergencyIpLimitIngress
	message
	notify
	options
	otherRequests
	qoe
	refer
	response
	state
	subscribe

 

Command Parameters

SIP CAC Profile Parameter

Parameter

Length/Range

Description

sipCacProfile

1-23

<profile name> – The name of SIP Call Admission Control (CAC) profile.

Refer to the subsequent sections for SIP CAC Profile configuration options.

 

Aggregate Message

 

 

Use this object to configure the Aggregate Message policer settings listed below.

Command Syntax

% set profiles sipCacProfile <profile_name> aggregateMessage 
	egressBurstSize (1-10000)
	egressRate (1-1000, unlimited)
	egressRatePeriod (1-10)
	ingressBurstSize (1-10000)
	ingressRate (1-1000, unlimited)
	ingressRatePeriod (1-10)

 

Command Parameters

Aggregate Message Parameters

Parameter

Length/Range

Description

egressBurstSize1-10000

Maximum Aggregate Message egress burst size. (default = 10)

egressRate1-1000, 'unlimited'

Maximum Aggregate Message egress rate. (default is 'unlimited')

egressRatePeriod 1-10

Aggregate Message egress rate period in seconds. (default = 1)

ingressBurstSize1-10000

Maximum Aggregate Message ingress burst size. (default = 10)

ingressRate1-1000, 'unlimited'

Maximum Aggregate Message ingress rate. (default is 'unlimited')

ingressRatePeriod

1-10

Aggregate Message ingress rate period in seconds. (default = 1)

Bandwith

Command Syntax

% set profiles sipCacProfile <profile_name> 
	bandwidthLimit <0-2147483647> 
	bandwidthLimitThreshold <0-100>
    bandwidthVideoThreshold <0-100>

Command Parameters

Bandwith Parameters

Parameter

Length/Range

Description

bandwidthLimit

0-2147483647

Maximum bandwidth (in Kbps) a peer can utilize. (default is 'unlimited')

bandwidthLimitThreshold

0-100

Enter threshold value (as a percentage) to specify bandwidth utilization notification threshold. (default = 0)

bandwidthVideoThreshold

0-100

Enter threshold value (as a percentage of video bandwidth) to limit video streams to a specific bandwidth to prevent video calls consuming call bandwidth otherwise needed for audio calls. (default = 0)

Call

Command Syntax

% set profiles sipCacProfile <profile_name> 
	callEgressAggregateEmergencyPreference <1-10>
	callEgressAggregatePreference <1-10> 
	callEgressBurstSize <1-500> 
	callEgressEmergencyPreference <disabled | enabled> 
	callEgressRate <1-500, unlimited> 
	callEgressRatePeriod <1-10> 
	callIngressAggregateEmergencyPreference <1-10> 
	callIngressAggregatePreference <1-10> 
	callIngressBurstSize <1-500> 
	callIngressEmergencyPreference <disabled | enabled> 
	callIngressRate <1-500, unlimited> 
	callIngressRatePeriod <1-10> callLimit <0-30000, unlimited> 
	callLimitEgress <0-30000, unlimited> 
	callLimitIngress <0-30000, unlimited>
	callLimitThreshold <0-100>

Command Parameters

Call Parameters

Parameter

Length/Range

Description

callEgressAggregateEmergencyPreference

1-10

Emergency call preference within the aggregate policer at Egress. (default = 10)

callEgressAggregatePreference

1-10

Call preference within the aggregate policer at Egress. (default = 1)

callEgressBurstSize

1-500

Maximum call burst size for calls to a registered endpoint or peer. (default = 1).

callEgressEmergencyPreference

N/A

Emergency call preference at Egress.

  • disabled (default)
  • enabled

callEgressRate

1-500, unlimited

Maximum egress call rate in calls per time period. (default is 'unlimited').

callEgressRatePeriod

1-10

Time period (in seconds) over which the egress call rate applies. (default = 1).

callIngressAggregateEmergencyPreference

1-10

Emergency call preference within the aggregate policer at Ingress. (default = 10)

callIngressAggregatePreference

1-10

Call preference within the aggregate policer at Ingress. (default = 1)

callIngressBurstSize

1-500

Maximum call burst size from a peer or registered endpoint. (default = 1).

callIngressEmergencyPreference

N/A

Emergency call preference at Ingress.

  • disabled (default)
  • enabled

callIngressRate

1-500, unlimited

Maximum call arrival rate from a peer or registered endpoint per callIngressRatePeriod. (default is 'unlimited').
A value of "0" indicates that call rate policing is not applicable.

callIngressRatePeriod

1-10

Time period (in seconds) over which the callIngressRate applies. (default = 1).

callLimit

0-30000, unlimited

Maximum number of active calls to and from any registered endpoint or peer (e.g. total number of ingress and egress calls). (default is 'unlimited')

callLimitEgress

0-30000, unlimited

Maximum number of outbound active calls. (default is 'unlimited')

callLimitIngress

0-30000, unlimited

Maximum number of inbound active calls. (default is 'unlimited')

callLimitThreshold

0-100

Call Limit utilization notification threshold, as a percentage. (default = 0).

Dynamic Black List Aggregate Reject

 

Use this object to Dynamically Blacklist (DBL) an endpoint based on the CAC policer reject rate using settings below.

Command Syntax

% set profiles sipCacProfile <profile_name>  dblAggregateRej 
	ingressBurstSize (1-10000)
	ingressRate (1-1000, unlimited)
	ingressRatePeriod (1-10)

Command Parameters

DBL Aggregate Reject Parameters

Parameter

Length/Range

Description

ingressBurstSize1-10000

Maximum DBL Aggregate Reject ingress burst size.(default = 1)

ingressRate1-1000, 'unlimited'

Maximum DBL Aggregate Reject ingress rate.(default is 'unlimited')

ingressRatePeriod

1-10

DBL Aggregate Reject ingress rate period in seconds.(default = 1)

Emergency Oversubscription

Command Syntax

% set profiles sipCacProfile <profile_name> 
	emergencyOversubscription <0-1000> 
	emergencyOversubscriptionEgress <0-1000> 
	emergencyOversubscriptionIngress <0-1000>

Command Parameters

Emergency Oversubscription Parameters

Parameter

Length/Range

Description

emergencyOversubscription

0-1000

Oversubscription of calls (as a percentage) allowed for emergency calls. (default = 0).

emergencyOversubscriptionEgress

0-1000

Oversubscription of egress calls (as a percentage) allowed for emergency calls. When the baseline limit is reached, normal calls are stopped but emergency calls are allowed up to this additional percentage. (default = 10).

emergencyOversubscriptionIngress

0-1000

Oversubscription of calls (as a percentage) allowed for emergency calls. When the baseline limit is reached, normal calls are stopped but emergency calls are allowed up to this additional percentage. (default = 10).

Extended Emgergency IP Limit

Command Syntax

% set profiles sipCacProfile <profile_name> 
	extendedEmergencyIpLimit <0-40000>
	extendedEmergencyIpLimitEgress <0-40000>
	extendedEmergencyIpLimitIngress <0-40000>

Command Parameters

Extended Emgergency IP Limit Parameters

Parameter

Length/Range

Description

extendedEmergencyIpLimit

0-40000

Additional number of emergency calls (expressed as a numeric value) allowed if call limit and emergency oversubscription quota are exhausted. (default = 0)
extendedEmergencyIpLimitEgress 0-40000Additional number of emergency calls (expressed as a numeric value) allowed for egress CAC group if call limit and emergency oversubscription quota are exhausted. (default = 0)
extendedEmergencyIpLimitIngress 0-40000

Additional number of emergency calls (expressed as a numeric value) allowed for ingress CAC group if call limit and emergency oversubscription quota are exhausted. (default = 0)

 

Message

 

Use this object to configure the MESSAGE message in a SIP CAC profile using the settings below.

Command Syntax

% set profiles sipCacProfile <profile_name> message 
	egressAggregatePreference (1-10)
	egressBurstSize (1-10000)
	egressRate (1-1000, unlimited)
	egressRatePeriod (1-10)
	ingressAggregatePreference (1-10)
	ingressBurstSize (1-10000)
	ingressRate (1-1000, unlimited)
	ingressRatePeriod (1-10)

Command Parameters

MESSAGE Parameters

Parameter

Length/Range

Description

egressAggregatePreference1-10

MESSAGE preference within egress aggregate policer. (default = 1)

egressBurstSize1-10000

Maximum MESSAGE egress burst size. (default = 1)

egressRate1-1000, 'unlimited'

Maximum MESSAGE egress rate. (default is 'unlimited')

egressRatePeriod1-10

MESSAGE egress rate period in seconds. (default = 1)

ingressAggregatePreference1-10

MESSAGE preference within ingress aggregate policer. (default = 1)

ingressBurstSize1-10000

Maximum MESSAGE ingress burst size. (default = 1)

ingressRate1-1000, 'unlimited'

Maximum MESSAGE ingress rate. (default is 'unlimited')

ingressRatePeriod

1-10

MESSAGE ingress rate period in seconds. (default = 1)

Notfiy

Command Syntax

% set profiles sipCacProfile <profile_name> notify 
	egressAggregatePreference (1-10)
	egressBurstSize (1-10000)
	egressRate (1-1000, unlimited)
	egressRatePeriod (1-10)
	ingressAggregatePreference (1-10)
	ingressBurstSize (1-10000)
	ingressRate (1-1000, unlimited)
	ingressRatePeriod (1-10)

Command Parameters

NOTIFY Parameters

Parameter

Description

notify

Use this object to configure the NOTIFY message in a SIP CAC profile.

NOTE: Egress and ingress settings are the same as MESSAGE Parameters above. Simply replace MESSAGE with NOTIFY in the descriptions.

Options

Command Syntax

% set profiles sipCacProfile <profile_name> options
	egressAggregatePreference (1-10)
	egressBurstSize (1-10000)
	egressRate (1-1000, unlimited)
	egressRatePeriod (1-10)
	ingressAggregatePreference (1-10)
	ingressBurstSize (1-10000)
	ingressRate (1-1000, unlimited)
	ingressRatePeriod (1-10)

Command Parameters

OPTIONS Parameters

Parameter

Description

options

Use this object to configure the OPTIONS message in a SIP CAC profile.

NOTE: Egress and ingress settings are the same as MESSAGE Parameters above. Simply replace MESSAGE with OPTIONS in the descriptions.

 

 

Other Requests

Use this object to configure the OTHER REQUESTS message in a SIP CAC profile.

Command Syntax

% set profiles sipCacProfile <profile_name> otherRequests
	egressAggregatePreference (1-10)
	egressBurstSize (1-10000)
	egressRate (1-1000, unlimited)
	egressRatePeriod (1-10)
	ingressAggregatePreference (1-10)
	ingressBurstSize (1-10000)
	ingressRate (1-1000, unlimited)
	ingressRatePeriod (1-10)

Command Parameters

OTHER REQUESTS Parameters

Parameter

Length/Range

Description

egressAggregatePreference1-10

OTHER REQUESTS preference within egress aggregate policer. (default = 1)

egressBurstSize1-10000

Maximum OTHER REQUESTS egress burst size. (default = 5)

egressRate1-1000, 'unlimited'

Maximum OTHER REQUESTS egress rate. (default is 'unlimited')

egressRatePeriod1-10

OTHER REQUESTS egress rate period in seconds. (default = 1)

ingressAggregatePreference1-10

OTHER REQUESTS preference within ingress aggregate policer. (default = 1)

ingressBurstSize1-10000

Maximum OTHER REQUESTS ingress burst size. (default = 5)

ingressRate1-1000, 'unlimited'

Maximum OTHER REQUESTS ingress rate. (default is 'unlimited')

ingressRatePeriod

1-10

OTHER REQUESTS ingress rate period in seconds. (default = 1)

QOE

Use this object to configure the Quality of Service-based routing configuration. 

Command Syntax

% set profiles sipCacProfile <profile_name> qoe
	asr
		asrCriticalLimit (0-70)
		defaultQosAsr (0-100)
		majorQosAsrLimit (0-90)
	clu 
		cluCriticalLimit (80-100)   
	minTimeToProceed (60-3600)  
	pgrd 
		defaultPgrdFactor (50-10000)  
		pgrdCriticalLimit (50-10000)  
	scru 
		scruCriticalLimit (80-100)

Command Parameters

QOE Parameters

Parameter

Length/Range

Description

 asrN/A

Answer Seizure Ratio (ASR) measurement.

  • asrCriticalLimit – The critical ASR limit below which call admission stops. (range: 0-70% / default = 40)
  • defaultQosAsr – Default ASR value to use when no calls are made for a sampling period. (range: 0-100% / default = 90)
  • majorQosAsrLimit – The major ASR limit. When breached, an INFO log is generated and trunk group stats are incremented one value. (range: 0-90% / default = 70)
 clu cluCriticalLimit80-100

<value> – Critical Call Limit Utilization (CLU) limit (as percentage) below which the trunk group or peer is marked out of service for egress calls. (default = 80)

 minTimeToProceed60-3600

Minimum time to wait (in seconds) before call admission resumes after peer/trunk group KPI falls below critical threshold. (default = 60)

 
 pgrdN/A

Post Gateway Ringing Delay measurement.

  • defaultPgrdFactor – Default PGRD value when no calls are made for a sampling period. (range: 50-10000 milliseconds / default = 500)
  • pgrdCriticalLimit – Critical PGRD limit above which the trunk group is marked out of service, and not chosen for routing. (range: 50-10000 milliseconds / default = 2000)

scru scruCriticalLimit

80-100

SCRU) KPI critical limit (as percentage) above which the trunk group/peer is not chosen for routing. (default = 80)

Refer

Command Syntax

% set profiles sipCacProfile <profile_name> refer 
	egressAggregatePreference (1-10)
	egressBurstSize (1-10000)  
	egressRate (1-1000, unlimited)  
	egressRatePeriod (1-10)  
	ingressAggregatePreference (1-10)   
	ingressBurstSize (1-10000)   
	ingressRate (1-1000, unlimited)   
	ingressRatePeriod (1-10)

Command Parameters

REFER Parameters

Parameter

Description

refer

Use this object to configure the REFER message in a SIP CAC profile.

NOTE: Egress and ingress settings are the same as MESSAGE Parameters above. Simply replace MESSAGE with REFER in the descriptions.

 

 

Response

Command Syntax

% set profiles sipCacProfile <profile_name> response 
	egressAggregatePreference (1-10)
	egressBurstSize (1-10000)   
	egressRate (1-1000, unlimited)
	egressRatePeriod (1-10)
	ingressAggregatePreference (1-10)
	ingressBurstSize (1-10000)
	ingressRate (1-1000, unlimited)
	ingressRatePeriod (1-10)

Command Parameters

RESPONSE Parameters

Parameter

Description

response

Use this object to configure the RESPONSE message in a SIP CAC profile.

NOTE: Egress and ingress settings are the same as OTHER REQUESTS Parameters above. Simply replace OTHER REQUESTS with RESPONSE in the descriptions.

 

 

State

Command Syntax

% set profiles sipCacProfile <profile_name> state <disabled | enabled>

Command Parameters

State Parameters

Parameter

Description

state

Administrative state of this SIP CAC Profile.

  • disabled (default)
  • enabled

Subscribe

Command Syntax

% set profiles sipCacProfile <profile_name> subscribe 
	egressAggregatePreference (1-10)   
	egressBurstSize (1-10000)   
	egressRate (1-1000, unlimited)   
	egressRatePeriod (1-10)
	ingressAggregatePreference (1-10)   
	ingressBurstSize (1-10000)
	ingressRate (1-1000, unlimited)
	ingressRatePeriod (1-10)

Command Parameters

SUBSCRIBE Parameters

Parameter

Description

subscribe

Use this object to configure the SUBSCRIBE message in a SIP CAC profile.

NOTE: Egress and ingress settings are the same as MESSAGE Parameters above. Simply replace MESSAGE with SUBSCRIBE in the descriptions.

 

Command Examples

 % set profiles sipCacProfile SIPCAC_TEST state enabled 
	callIngressRate 78 callIngressRatePeriod 4 
	callIngressBurstSize 342 callEgressRate 43 
	callEgressRatePeriod 3 callEgressBurstSize 45 callLimit 
	4567 emergencyOversubscription 24
% commit

% show profiles sipCacProfile SIPCAC_TEST 
 	state enabled;  
	callIngressRate 78;  
	callIngressRatePeriod 4;  
	callIngressBurstSize 342;  
	callEgressRate 43;  
	callEgressRatePeriod 3;  
	callEgressBurstSize 45;  
	callLimit 4567;  
	emergencyOversubscription 24;
% set profiles sipCacProfile cacProfile1 extendedEmergencyIpLimit 10 extendedEmergencyIpLimitIngress 20 extendedEmergencyIpLimitEgress 30
% commit

% show profiles sipCacProfile cacProfile1 
extendedEmergencyIpLimit        10;
extendedEmergencyIpLimitIngress 20;
extendedEmergencyIpLimitEgress  30;

 

  • No labels