You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

In this section:

 

 

Command Syntax

The command syntax of the objects related to the show status addressContext command is shown below. 

> show status addressContext <addressContext name>
	cacOffenderStatus
	dnsGroup
	dynamicBlackList
	ipAccessControlList
	ipInterfaceGroup
	ipRouteStatus
	ipsec
	linkDetectionGroup
	linkDetectionGroupStatistics
	linkDetectionGroupStatus
	logicalSigAddressBindingStatus 
	sipActiveGroupRegStatus
	sipActiveGroupRegSummaryStatus
	sipActiveRegisterNameStatus
	sipDeletedRegStatus
	sipDeletedRegisterNameStatus
	sipRegCountStatistics
	sipSubCountStatistics
	sipSubscriptionStatus
	surrRegCountStatistics
	zone
	zoneCurrentStatistics
	zoneIntervalStatistics
	zoneStatus

 

Command syntax for the above objects is defined in greater detail below.

cacOffenderStatus

> show status addressContext <addressContext_name> cacOffenderStatus
	<index number>
	egressCallRejects
	egressMessageRejects 
	egressNotifyRejects
	egressOptionsRejects 
	egressOtherRequestRejects
	egressReferRejects 
	egressSubscribeRejects 
	firstRejectAt
	ingressCallRejects 
	ingressMessageRejects
	ingressNotifyRejects 
	ingressOptionsRejects
	ingressOtherRequestRejects 
	ingressReferRejects
	ingressSubscribeRejects
	ipAddress
	lastRejectAt 
	messageFirstRejectAt 
	messageLastRejectAt
	notifyFirstRejectAt
	notifyLastRejectAt 
	optionsFirstRejectAt 
	optionsLastRejectAt
	otherFirstRejectAt 
	otherLastRejectAt
	referFirstRejectAt 
	referLastRejectAt
	subscribeFirstRejectAt 
	subscribeLastRejectAt
	zoneId

 

dnsGroup

> show status addressContext <addressContext_name> dnsGroup 
	<dnsGroup name>
		dnsEntryDataStatus
		dnsEntryStatus
		dnsServerStatistics

dynamicBlacklist

> show status addressContext <addressContext_name> dynamicBlackList
	dblPolicerStatus
	cumulativeEnforcements
	policerEnforcements
	dblStatus
	currentAction <blacklist | watch>
	discardPacketCount
	effectivePeriodRemaining
	trunkGroup

 

intercept

>  show status addressContext <addressContext_name> intercept
	callDataChannel 
	interceptCallDataChannelStatistics

ipAccessControlList

> show status addressContext <addressContext_name> ipAccessControlList 
	defaultAclStatistics
	getAggrPolicers 
	ipAclOverallStatistics
	ipAclRuleStatistics
	ipAclRulesByPrecedence
	rule

 

ipInterfaceGroup

> show status addressContext <addressContext_name> ipInterfaceGroup <IG name> 
	ipInterfaceStatus
		<IP Interface name>
		actualBandwidth
		allocatedBandwidth
		bwDeviation
		ifindex
		numMediaStreams
		oosReason
		operState
		rxPackets
		txPackets

ipRouteStatus

> show status addressContext <addressContext_name> ipRouteStatus <system name> <ip address> <prefix> 
	protocol <bbnSpfIgp | bgp | ciscoEigrp | ciscoIgrp | egp | esIs | ggp | hello | icmp | idpr | isIs | local | netmgmt | ospf | other | rip>

 

ipsec

>  show status addressContext <addressContext_name> ipsec 
	ikeSaStatistics
	ikeSaStatus
	ipsecSaStatistics
	ipsecSaStatus
	systemStatistics

linkDetectionGroup

> show status addressContext <addressContext_name> linkDetectionGroup
	linkDetectionGroup
	linkDetectionGroupStatistics
	linkDetectionGroupStatus

linkDetectionGroupStatistics

> show status addressContext <addressContext_name> linkDetectionGroupStatistics <Link Detection Group name> 
	doubleFailures
	failures
	singleFailures

 

linkDetectionGroupStatus

> show status addressContext <addressContext_name> linkDetectionGroupStatus <Link Detection Group name> failures

logicalSigAddressBindingStatus

> show status addressContext <addressContext_name> logicalSigAddressBindingStatus <ip interface>

sipActiveGroupRegStatus

> show status addressContext <addressContext_name> sipActiveGroupRegStatus <id>
aorName | contactURI | creationTime | extExpirationTime | intExpirationTime | nextHopIpAddress | nextHopPortNum | regIdIsChild | registrarDomainName | registrarIpAddress | registrarPortNum | state

 

sipActiveGroupRegSummaryStatus

> show status addressContext <addressContext_name> sipActiveGroupRegSummaryStatus <registrar ip address>
	aorName
	nextRegIdIsChild
	state

sipActiveRegisterNameStatus

> show status addressContext <addressContext_name> sipActiveRegisterNameStatus <aor name>
contactURI | creationTime | e2aeMediaSecurity | endPointBehindNapt | externalExpirationTime | internalExpirationTime | isRoaming | natPinholeLearningStatus |  nextHopIpAddress | nextHopPortNum | registrarDomainName | registrarIpAddress | registrarPortNum | securityMechanismType | state

sipDeletedRegStatus

> show status addressContext <addressContext_name> sipDeletedRegStatus <id>
aorName | contactURI | creationTime | nextHopIpAddress | nextHopPortNum | reasonCode | registrarDomainName | registrarIpAddress | registrarPortNum | terminationTime

 

sipDeletedRegisterNameStatus

> show status addressContext <addressContext_name> sipDeletedRegisterNameStatus <aor name>
	contactURI | creationTime | nextHopIpAddress | nextHopPortNum | reasonCode | registrarDomainName | registrarIpAddress | registrarPortNum | terminationTime

sipRegCountStatistics

> show status addressContext <addressContext_name> sipRegCountStatistics entry
	sipEmergencyRegAcceptTotal
	sipEmergencyRegActiveTotal
	sipRegCountAttempts
	sipRegCountCumCompletions
	sipRegCountPending
	sipRegCountStable
	sipRegCountTotal

sipSubCountStatistics

> show status addressContext <addressContext_name> sipSubCountStatistics entry 
	sipSubCountAttempts
	sipSubCountCumCompletions
	sipSubCountPending
	sipSubCountStable
	sipSubCountTotal

 

sipSubscriptionStatus

> show status addressContext <addressContext_name> sipSubscriptionStatus <id>
callId | expirationTime | nextHopIpAddress | nextHopPortNum | origEPDomain | previousHopIpAddress | previousHopPortNum | serverDomainName | state

surrRegCountStatistics

> show status addressContext <addressContext_name> surrRegCountStatistics entry
	surrRegActiveRegCount
	surrRegConfiguredCount

 

zone

> show status addressContext <addressContext_name> zone <zone name>
	callCurrentStatistics
	callFailureCurrentStatistics 
	callFailureIntervalStatistics
	callIntervalStatistics
	filterSipSrc
	filterSipSrcStatistics
	gwSigPortStatistics
	gwSigPortStatus
	h323SigPortStatistics
	h323SigPortStatus
	peerPathchkStatus
	peerQosStatus
	peerSurrRegStatus
	sipArsStatus
	sipCurrentStatistics
	sipIntervalStatistics
	sipOcsCallCurrentStatistics
	sipOcsCallIntervalStatistics
	sipPeerCacStatus
	sipRegAdaptiveNaptLearningStatistics
	sipSigConnStatistics
	sipSigConnStatus 
	sipSigPortStatistics 
	sipSigPortStatus 
	sipSigPortTlsStatistics
	sipSigTlsSessionStatus
	sonusSipSigPeerOvldStatusEntry
	trafficControlCurrentStatistics
	trafficControlIntervalStatistics
	trunkGroupQoeStatus
	trunkGroupStatus

 

zoneCurrentStatistics

> show status addressContext <addressContext_name> zoneCurrentStatistics <zone name>
egressFailBWLimit | egressFailCallLimit | egressFailCallPolicing | egressSipRegFailLimit | egressSipRegPolicing | ingressFailBWLimit | ingressFailCallLimit | ingressFailCallPolicing | ingressSipRegFailLimit | ingressSipRegPolicing

zoneIntervalStatistics

> show status addressContext <addressContext_name> zoneIntervalStatistics <counter*>
egressFailBWLimit | egressFailCallLimit | egressFailCallPolicing | egressSipRegFailLimit | egressSipRegPolicing | ingressFailBWLimit | ingressFailCallLimit | ingressFailCallPolicing | ingressSipRegFailLimit | ingressSipRegPolicing | intervalValid | time

*  The counter (or number) is associated with a performance measurement in a previous 15-minute measurement interval. In the case where the agent has no valid data available for a particular interval, the corresponding object instance is not available; and upon a retrieval request a corresponding error message is returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation).

In a system supporting a history of ‘n’ intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15-minute interval:

  • discard the value of IntervalCount(n)
  • the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1
  • the value of IntervalCount(1) becomes that of CurrentCount
  • the TotalCount, if supported, is adjusted.

zoneStatus

> show status addressContext <addressContext_name> zoneStatus <zone name>
activeSipRegCount | bwAvailable | bwCurrentLimit | bwInboundUsage | bwOutboundUsage | emergencyCallsBwUsage | inboundCallsUsage | outboundCallsUsage | priorityCallUsage | totalCallsAvailable | totalCallsConfigured

Command Parameters

The parameters associated with the 'show status addressContext' command are listed in the table below.

The following objects are included in this table for completeness, but only apply when using the 

show table addressContext
command:

natDirectMediaGroup, rtpServerTable, surrRegCountStatistics

MultiExcerpt named showTableAddressContextParams was not found -- Please check the page name and MultiExcerpt name used in the MultiExcerpt-Include macro

The following objects only apply when using the 

show table addressContext
command:

peer, spd

 

 

The following objects only apply when using the 

show table addressContext
command:

dialogTransparency, disableZoneLevelLoopDetection, dnsGroup, domainName, flexiblePolicyAdapterProfile, gwSigPort, gwTrunkGroup, h323SigPort, h323TrunkGroup, id, ipPeer, messageManipulation, mtrmConnPort, remoteDeviceType, sipSigPort, sipTrunkGroup

 

 

 

Command Examples

To show zone current statistics:

admin@SBX15> show status addressContext default zoneCurrentStatistics
zoneCurrentStatistics defaultSigZone {
    ingressFailCallLimit    0;
    egressFailCallLimit     0;
    ingressFailCallPolicing 0;
    egressFailCallPolicing  0;
    ingressFailBWLimit      0;
    egressFailBWLimit       0;
    ingressSipRegFailLimit  0;
    egressSipRegFailLimit   0;
    ingressSipRegPolicing   0;
    egressSipRegPolicing    0;
}

 

  • No labels