You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Back to Table of Contents

Back to CLI Configure Mode

Back to Address Context - CLI

Back to Zone - CLI

 

The flexiblePolicyAdapterProfile Zone object is used to assign a flexible policy-specific SIP Adaptor Profile to a specific zone.

Note

 Flexible Policy is not supported on ERE and is intended for use with an external PSX only.

Command Syntax

% set addressContext <addressContext name> zone <zone name> flexiblePolicyAdapterProfile <flexiblePolicyAdapterProfile name> 

Command Parameters

Zone Domain Name Parameters

Parameter

Description

flexiblePolicyAdapterProfile

Use this Zone object to associate a sipAdaptorProfile configured for flexible policy (profileType=flexiblePolicy) with a particular Zone.

If flexiblePolicyAdapterProfile is provisioned both at the trunk group and zone levels, the trunk group’s profile takes precedence. If inputAdapterProfile is configured, it is applied first to manipulate the PDU and then flexiblePolicyAdapterProfile rules are applied on the manipulated PDU.

 

  • No labels