In this section:
Overview
The SBC Edge is certified to offer Microsoft Teams Direct Routing services; the SBC Edge can be used to connect any Teams client to:
- A PSTN trunk, whether based on TDM (e.g. PRI, BRI, etc.), CAS, or SIP
- 3rd-party, non-Teams-certified SIP/TDM based PBXs, analog devices, and SIP clients
These instructions detail how to configure the SBC Edge (SBC 1000/2000 and SBC SWe Lite) to connect Microsoft Teams Direct Routing services deployed in an Enterprise network (On Premises). For public cloud deployments, refer to Connect SBC SWe Lite to Microsoft Teams Direct Routing Deployed in Azure. The network diagram below displays the connection topology for Microsoft Teams Direct Routing deployed in an Enterprise network.
SBC Edge connects to Microsoft Teams Direct Routing Deployed in an Enterprise Network
Step 1: Install SBC Edge
These instructions assume the SBC Edge product (SBC SWe Lite, SBC 1000/2000) is installed and running. If the product is not installed, refer to the links below. Installation Requirements On KVM: Installing SBC SWe Lite on KVM Hypervisor
Product Installation SBC SWe Lite SBC 1000 Installing the SBC 1000 Hardware SBC 2000
Step 2: Review Prerequisites for Microsoft Teams Direct Routing
Microsoft Teams Direct Routing Configuration
Consult the Microsoft documentation for detailed information on Direct Routing interface configuration guidelines, including the RFC standards and the syntax of SIP messages.
SBC Edge Software
Ensure you are running the latest version of SBC software:
- To locate the SBC Edge software current running, refer to: Viewing the Software Version and Hardware ID.
- To download and upgrade a new version of SBC Edge software, refer to: Installing and Commissioning the SBC Edge and SBC SWe Lite.
Obtain IP Address and FQDN
Requirements for configuring the SBC Edge in support of Teams Direct Routing include:
SBC Edge Requirements
| Requirement | How it is Used |
|---|---|
Public IP address of NAT device (must be Static)* Private IP address of the SBC | Required for SBC Behind the NAT deployment. |
| Public IP address of SBC | Required for SBC with Public IP deployment. |
| Public FQDN | The Public FQDN must point to the Public IP Address. |
*NAT translates a public IP address to a Private IP address.
Domain Name
For the SBC Edge to pair with Microsoft Teams, the SBC FQDN domain name must match a name registered in both the Domains and DomainUrlMap fields of the Tenant. Verify the correct domain name is configured for the Tenant as follows:
- On the Microsoft Teams Tenant side, execute Get-CsTenant.
- Review the output.
- Verify that the Domain Name configured is listed in the Domains and DomainUrlMap attributes for the Tenant. If the Domain Name is incorrect or missing, the SBC will not pair with Microsoft Teams.
Users may be from any SIP domain registered for the tenant. For example, you can configure user user@SonusMS01.com with the SBC FQDN name sbc1.hybridvoice.org, as long as both names are registered for the tenant.
Domain Name Examples
| Domain Name* | Use for SBC FQDN? | FQDN Names - Examples |
|---|---|---|
| SonusMS01.com |  | Valid names:
|
hybridvoice.org | | Valid names:
Non-Valid name: sbc1.europe.hybridvoice.org (requires registering domain name europe. hybridvoice.org in “Domains” first) |
*Do not use the *.onmicrosoft.com tenant for the domain name.
Configure Domain Names - Example
Obtain Certificate
Public Certificate
The Certificate must be issued by one of the supported certification authorities (CAs). Wildcard certificates are supported.
Refer to Microsoft documentation for the supported CAs.
- Refer to Domain Name for certificate formats.
Configure and Generate Certificates on the SBC
Warning: Common Encryption Certificate Issues Arise from Missing Root Certificates
- Did you only install the CA-signed SBC certificate, along with the intermediate certificate(s) sent by your issuing CA?
- Did you get the following error message from the SBC?
If so, the likely reason is a missing CA Root Certificate. The SBC does not have any pre-installed CA root X.509 certificates, unlike typical browsers found on your PC. Ensure the entire certificate chain of trust is installed on the SBC, including the root certificate. Acquire the CA root certificate as follows:
- Contact your system administrator or certificate vendor to acquire the root, and any further missing intermediate certificate(s) to provision the entire certificate chain of trust within the SBC;
- Load the root certificate, along with the intermediate and SBC certificates, according to Importing Trusted Root CA Certificates.
NOTE: Root certificates are easily acquired from the certificate authorities. For example, the root certificate for the GoDaddy Class 2 Certification Authority may be found at https://ssl-ccp.godaddy.com/repository?origin=CALLISTO . For more information about root certificates, intermediate certificates, and the SBC server (“leaf”) certificates, refer to this tutorial.
For other certificate-related errors, refer to Common Troubleshooting Issues with Certificates in SBC Edge.
Microsoft Teams Direct Routing allows only TLS connections from the SBC for SIP traffic with a certificate signed by one of the trusted certification authorities.
Request a certificate for the SBC External interface and configure it based on the example using GlobalSign as follows:
- Generate a Certificate Signing Request (CSR) and obtain the certificate from a supported Certification Authority.
- Import the Public CA Root/Intermediate Certificate on the SBC.
- Import the Microsoft CA Certificate on the SBC.
- Import the SBC Certificate.
The certificate is obtained through the Certificate Signing Request (instructions below). The Trusted Root and Intermediary Signing Certificates are obtained from your certification authority.
Step 1: Generate a Certificate Signing Request and obtain the certificate from a supported Certification Authority (CA)
Many CA's do not support a private key with a length of 1024 bits. Validate with your CA requirements and select the appropriate length of the key.
- Access the WebUI.
- Access Settings > Security > SBC Certificates.
Click Generate SBC Edge CSR.
Enter data in the required fields.
Click OK. After the Certificate Signing request finishes generating, copy the result to the clipboard.
Generate Certificate Signing Request
- Use the generated CSR text from the clipboard to obtain the certificate.
Step 2: Deploy the SBC and Root/Intermediate Certificates on the SBC
After receiving the certificates from the certification authority, install the SBC Certificate and Root/Intermediate Certificates as follows:
- Obtain Trusted Root and Intermediary signing certificates from your certification authority.
- Access the WebUI.
- To install Trusted Root Certificates, click Settings > Security > SBC Certificates > Trusted Root Certificates.
- Click Import and select the trusted root certificates.
- To install the SBC certificate, open Settings > Security > SBC Certificates > SBC Primary Certificate.
Validate the certificate is installed correctly.
Validate Certificate
- Click Import and select X.509 Signed Certificate.
Validate the certificate is installed correctly.
Validate Certificate
Firewall Rules
Ribbon recommends the deployment of the SBC Edge product behind a firewall, within the DMZ, regardless of the assignment of a public IP to the SBC in question. Refer to SBC Edge Security Hardening Checklist for more information about the SBC and firewalls.
This section lists the ports, protocols and services for firewalls that are in the path of the SBC connecting to Teams Direct Routing.
Basic Firewall Rules for All Call Flows
Firewall Rules for the SBC with Media Bypass
Step 3: Configure Office 365 Tenant Voice Routing
A Tenant is used within the Microsoft environment as a single independent enterprise that has subscribed to Office 365 services; through this tenant, administrators can manage projects, users, and roles. Access the Tenant configuration and configure as detailed below. (For details on accessing the Tenant, refer to Microsoft Teams Documentation).
Create Online PSTN Gateway that points to the SBC:
Enter the SBC FQDN (Example below: aepsite6.SonusMS01.com). The FQDN must be configured for the Tenant in both the Domains and the DomainUrlMap fields.
Enter the SBC SIP Port (Example below - SipPort5061).
New-CsOnlinePSTNGateway -Fqdn aepsite6.SonusMS01.com -SipSignallingPort SipPort5061 -MaxConcurrentSessions <Max Concurrent Session which SBC capable handling> -Enabled $true
Configure Teams usage for the user:
Enter the User Identity (Example below: -user1@domain.com)
Get-CsOnlineUser -Identity user1@domain.com Set-CsUser -Identity user1@domain.com -EnterpriseVoiceEnabled $true -HostedVoiceMail $true -OnPremLineURI tel:+10001001008 Grant-CsOnlineVoiceRoutingPolicy -PolicyName "GeneralVRP" -Identity user1@domain.com Grant-CsTeamsCallingPolicy -PolicyName AllowCalling -Identity user1@domain.com Grant-CsTeamsUpgradePolicy -PolicyName UpgradeToTeams -Identity user1@domain.com
Step 4: Configure SBC Edge for Microsoft Teams Direct Routing
The SBC Edge is configured via Easy Configuration Wizard.
- Access the WebUI. Refer to Logging into the SBC Edge.
- Click on the Tasks tab.
- From the left side menu, click SBC Easy Setup > Easy Config Wizard.
From the Application drop down box, select the relevant Easy Configuration wizard. Depending on your network, follow a relevant Easy Configuration wizard. Refer to the table below for guidance.
Easy Configuration - Microsoft Teams Direct Routing Configuration
Deployment Type Refer to Configuration: SBC Connects to Microsoft Teams via SIP Trunk SIP trunks ↔ Microsoft Phone System Direct Routing SBC Connects to Microsoft Teams via PSTN Provider through ISDN. ISDN PSTN ↔ Microsoft Phone System Direct Routing SBC connects to Microsoft Teams via IP PBX IP PBX ↔ Microsoft Phone System Direct Routing - For an SBC behind the NAT deployment only: In Step 2 of the Easy Configuration wizard, ensure the following is configured:
- From the Outbound NAT Traversal drop down list, select Enable. Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages.
- In the Public IP Address, enter the Public IP of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages.
- For Media Bypass in the Microsoft Teams Server:
- If Media Bypass is disabled in the server, proceed to Step 5.
If Media Bypass is enabled in the server, this step is complete.
The Configuration Wizard is complete.
For the SBC 1000/SBC 2000 only:
By default, when configuring the SBC with Easy Configuration, the default Ethernet Interface for Border Element (PSTN Endpoint) is configured as Auto. Ribbon recommends changing this configuration manually to the Ethernet port that points to the SIP Trunk side.
For instructions on changing the Ethernet interface, refer to: Configuring and Modifying Logical Interfaces.
Step 5: Configure SBC Edge when Microsoft Teams is in Non-Media Bypass Mode
Non-Media Bypass
Non-Media Bypass is Microsoft Teams Direct Routing related deployment where all media flows between Teams clients in the enterprise and the SBC transit the Teams Phone System based in the Azure cloud.
Teams Direct Routing - Without Media Bypass
Media Bypass is a Microsoft Teams Direct Routing deployment where all media flows between Teams clients in the enterprise connect directly to the SBC without transiting the Teams Phone System.
This additional step is required only in cases where Media Bypass is disabled on the Teams Server. Complete these steps after Easy Configuration is complete.
Easy Configuration enables Media Bypass by default. If Media Bypass is disabled on the Teams server, in addition to running Easy Configuration, you must disable Media Bypass in the SBC:
- In the WebUI, click the Settings tab.
- In the left navigation page, access Signaling Groups.
- Identify and open the Signaling Group used to connect to Microsoft Teams. For details on configuring Signaling Groups, refer to Managing Signaling Groups.
- From the RTCP Multiplexing field, select Disable.
- From the ICE Support field, select Disabled.
Click OK.
Disable Media Bypass
Step 6: Confirm SBC Edge Links to Microsoft Teams
For troubleshooting steps, refer to Best Practice - Troubleshoot Issues with Microsoft Teams Direct Routing.
Step 7: Place a Test Call
Place a test call as follows: Access the WebUI. Refer to Logging into the SBC Edge. In the WebUI, click the Diagnostics tab. In the left navigation pane, click Test a Call. Configure the parameters as shown below. Click OK. Place a Test Call - Parameters Parameter Value Destination Number Number assigned to a Teams user. Origination/Calling Number Number assigned to a Local user. Call Routing Table The routing table that handles the call from Microsoft Teams. Test a Call - Configuration Place a Test Call - Example The test call is now complete. For troubleshooting steps, refer to Best Practice - Troubleshoot Issues with Microsoft Teams Direct Routing.
Overview
Content Tools