You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

In this Section:

 

 

Note

This object is visible only for SBC SWe Cloud.

The SBC SWe Cloud supports configuring Load Balancing Service (LBS) to distribute cluster information between D-SBC instances. 

To configure an LBS on a PKT port (any IP Interface other than MGMT), set "clusterAdmin clusterComm type ip" before the LBS configuration on M-SBC. Refer to Support Intra-Cluster VNFC Communication Through Packet Ports by Assigning an IP Interface Group in CLI.

Configuring Load Balance Service

  1. Log on to the EMA Configurator as admin.
  2. Click All tab.
  3. On the navigation pane, click System > Load Balancing Service.

  4. You can modify the Group Name and Private IP Interface Group Name. Click Save.

    Load Balancing Service - MSBC

     


    Load Balancing Service - SSBC

     

Parameter Description

Parameter Description

ParameterDescription
groupName<name> – Domain name of the load balancing group.

inviteRetargetMode

Specifies the load balancing service mode for INVITEs. Enables load balancing for initial INVITE requests. 

If set to redirect, calls may get retargeted using SIP 302 to balance the load.

  • disabled (default)
  • redirect

registerRetargetMode

Specifies the load balancing service mode for REGISTERs. Enables load balancing for REGISTER requests.

If set to redirect, new registrations may get retargeted using SIP 302 to balance the load.

  • disabled (default)
  • redirect
privateIpInterfaceGroupName<name> – The name of the Private IP Interface Group used by M-SBC/T-SBC to communicate with MRF.

  • No labels