The SBC 5100, SBC 5110, SBC 5200, and SBC 5210 platforms are no longer supported beginning with the SBC Core 10.0.0R0 release. This release supports SBC 5400/7000/SWe/Cloud Native edition (CNe) platforms. Contact Ribbon Sales for upgrade information.
IMPORTANT
The following table lists the SBC feature license keys that apply in the Domain Locked (DL) environment. DL license keys contain a suffix of "-D" to distinguish them from similar license keys used in Node-Locked licensing.
| Feature ID | Usage | Type |
|---|---|---|
| SBC-CNE-INSTANCE-D | This license is used to differentiate the CNF deployments from the other deployments handled by the same RAMP. Without this license, totals calls up to 47 concurrent calls are supported on a CNe deployment. The maximum active SC pods can be 47, one call per SC pod is supported. The OAM is the only pod which will connect to the license manager. In case of completion of 90 days grace period, OAM communicates the information to SC pod to stop processing the calls. Modified: for 12.1.1 | On/Off |
DSP-AMRNB-D | RTU media interworking using AMRNB. Use license to enable AMR-NB audio transcoding. Note: Both DSP-AMRNB-D and VDSP-RTU-D licenses are required to transcode AMR-NB for SBC SWe. | Count |
DSP-AMRWB-D | RTU media interworking using AMRWB. Use license to enable AMR-WB audio transcoding. | Count |
DSP-EVRC-D | RTU media interworking using EVRC. Use license to enable EVRC audio transcoding. Note: This license is not applicable to SBC SWe because EVRC is not supported. | Count |
DSP-EVS-D | RTU media interworking using EVS. Use license to enable EVS transcoding. | Count |
DSP-G722-D | RTU media interworking using G.722. Use license to enable G.722 audio transcoding. Note: Unable to show "metadata-from": No such page "_space_variables" does not charge for the G.722 codec; however, the SBC 7000 series code still checks for this license. Because of this, a $0 charge DSP-G722-D license must be generated and installed on SBC 7000 series in order to use G.722 features. | On/Off |
DSP-SILK-D | RTU media interworking using SILK. Use license to enable SILK transcoding. | Count |
| ENCRYPT-D | Encryption function for signaling using TLS, IPsec. | Count |
SBC-RTU-D | Controls the right-to-use (RTU) for SIP and H.323 sessions. The following type of media sessions are enabled:
| Count |
SBC-SIP323-D | SIP/H.323 Interworking function. | On/Off |
SBC-POL-RTU-D | SBC Advanced ERE RTU per session license. Note: If both "SBC-POL-E911-D" and "SBC-POL-ENUM-D" licenses are installed, the "SBC-POL-RTU-D" license is not required. | Count |
SBC-SIP-I-D | SIP-I interworking function. | On/Off |
SRTP-D | Encryption function for media using secure RTP. | Count |
SBC-VIDEO-D | Video interworking support, including Content Sharing (BFCP), Far-End Camera Control (FECC) and H.239 for H.323 | Count |
SBC-MRF-RTU-D | Required to enable transcoding using an external Media Resource Function (MRF) device. The SBC-MRF-RTU-D license is not a substitute for the SBC-RTU-D session license. Both the licenses are required to allow a session towards the MRF. The SBC-MRF-RTU-D license is only applicable to the S-SBC when deploying the distributed-SBC architecture. | Count |
SBC-1X10GMP-D | SBC 5400 RTU license to enable media port(s) operating at 10 Gbps. This will activate two 10 Gbps packet ports. | On/Off |
SBC-4X1GMP-D | SBC 5400 RTU license to enable all four media ports. each operating at 1 Gbps. Note: If the SBC 5400 is configured for two 1 Gbps media ports (default configuration), no license is required). | On/Off |
SBC-LI-D | Enables support for Lawful Intercept service using ERE. | On/Off |
SBC-POL-ENUM-D | SBC ERE support for accessing ENUM databases. | On/Off |
SBC-POL-E911-D | RTU license for E911 service. | On/Off |
SBC-SIPREC-D | SIPREC session recording support. | Count |
SWE-INSTANCE-D | Required to run SBC software in an SBC SWe environment. | On/Off |
VDSP-RTU-D | Enables transcoding feature in SBC SWe. If value is non-zero, it allows specified number of transcoded calls on the system. If zero, no transcoded calls are allowed. VDSP-RTU-D count should be always less than or equal to SBC-RTU-D count. If not, no transcoded calls are allowed. Note: Any additional emergency oversubscription is not supported for transcoded emergency calls on SBC SWe. | Count |
| SIP-REG-D | DL Feature license for SIP Registrar functionality (Domain E-LIC FOR SIP-REG ON SBC Core). For DL licenses, the maximum license count is equal to the maximum registrations supported by the SBC. The Interval statistics logic reports the peak stable registrations during an interval and stores it in the pms file. The SBC uses this logic for DL License calculations, as described below.
| Count |
Overview
Content Tools