In this section:


Use this object to create and configure a call admission control (CAC) profile providing the ability for each SIP registered or static endpoint to have individualized limits on the number of active calls and the call rate.

A limit on active calls (CALL LIMIT) is applied to calls in either the ingress or egress direction, whereas policing controls (RATE, BURST-SIZE) apply to ingress and egress calls separately.

To View SIP CAC Profile

On the SBC main screen, choose a path:

  • All > Profiles > SIP CAC Profile
  • Configuration > Profile Management >Category: SIP CAC Profile > SIP CAC Profile
  • Configuration > System Provisioning > Category: CAC Provisioning > Profile
  • Security Configuration > SIP CAC Profile

The SIP CAC Profile window is displayed.

To Edit SIP CAC Profile

To edit any of the SIP CAC Profiles in the list, click the radio button next to the specific SIP CAC Profile name.

The Edit Selected SIP CAC Profile window is displayed below.

Make the required changes and click Save.

To Create SIP CAC Profile

To create a new SIP CAC Profile, click New SIP CAC Profile tab on the SIP CAC Profile List panel.

The Create New SIP CAC Profile window is displayed.


SIP CAC Profile Parameters:

Parameter

Length/Range

Description

Name

1-23 characters

The name of the SIP Call Admission Control (CAC) profile you are configuring. 

State

N/A

The administrative state of this SIP CAC Profile:

  • Disabled (default)
  • Enabled

NOTE: Setting a SIP CAC profile state to "Disabled" does not disable SIP CAC functionality on IP Peers to which the SIP CAC profile is assigned. To disable SIP CAC functionality on a specific IP Peer, disassociate the SIP CAC profile from the IP Peer.

Call Limit Threshold

0-100

The call limit utilization notification threshold limit. Default = 0.

Call Ingress Rate

1-1500, or unlimited

The maximum call arrival rate from a peer or registered endpoint per RATE- PERIOD. Default = unlimited

Call Ingress Rate Period

1-10

The period in seconds over which the CALL INGRESS RATE applies. Default = 1.

Call Ingress Burst Size

1-1500

The maximum call burst size from a peer or registered endpoint. Default = 1.

Call Ingress Emergency Preference

N/A

Specifies whether to enable call emergency preference in the Ingress mode or not. 

  • Disabled (default)
  • Enabled

Call Ingress Aggregate Preference

1-10

The preference of calls within the aggregate policer in the Ingress mode. Default = 1.

Call Ingress Aggregate Emergency Preference

1-10

The emergency preferences of calls within the aggregate policer in the Ingress mode. Default = 10.

Call Egress Rate

1-1500, or unlimited

The maximum call rate to a registered endpoint or peer per RATE-PERIOD. Default = unlimited. 

Call Egress Rate Period

1-10

The period in seconds over which the CALL EGRESS RATE applies. Default = 1.

Call Egress Burst Size

1-500

The maximum call burst size for calls to a registered endpoint or peer. Default is 1.

Call Egress Emergency Preference

N/A

Specifies whether to enable call emergency preference in the Egress mode or not. 

  • Disabled (default)
  • Enabled

Call Egress Aggregate Preference

1-10

The preference of calls within the aggregate policer in the Egress mode. Default = 1.

Call Egress Aggregate Emergency Preference

1-10

The emergency preferences of calls within the aggregate policer in the Egress mode. Default = 10.

Call Limit

0-150000, or unlimited

The maximum number of active calls to and from any registered endpoint or peer (the total number of ingress and egress calls). Default is unlimited.

Bandwidth Limit

0-2147483647, or unlimited

The maximum bandwidth a peer can use in kbps. The value range from 0 to 2147483647 k bits/second or unlimited.

Default is unlimited

Bandwidth Limit Threshold

0-100

The bandwidth limit value in percentage. Default = 0.

Bandwidth Video  Threshold

0-100

The threshold value (as a percentage of video bandwidth) to limit video streams to a specific bandwidth to prevent video calls consuming call bandwidth otherwise needed for audio calls. Default = 0, which indicates no video threshold value.

Emergency Oversubscription

0-1000

Oversubscription of calls (as a percentage) allowed for emergency calls. Oversubscription of calls (as a percentage) allowed for emergency calls. When the baseline limit is reached, normal calls will be stopped but emergency calls will be allowed up to this additional percentage.

Default = 10.

Extended Emergency IP Limit0-40000Additional number of emergency calls (expressed as a numeric value) allowed if call limit and emergency oversubscription quota are exhausted. Default = 0.

Call Limit Ingress

0-30000, or unlimited

The maximum number of inbound active calls.

Emergency Oversubscription Ingress

0-1000

The oversubscription of calls (as percentage) allowed for inbound emergency calls. Once the baseline limit is reached, normal calls are blocked but emergency calls are allowed. Default = 10.

Extended Emergency IP Limit Ingress0-40000Additional number of emergency calls (expressed as a numeric value) allowed for ingress CAC group if call limit and emergency oversubscription quota are exhausted. Default = 0.

Call Limit Egress

0-150000, or unlimited

The maximum number of outbound active calls. Default is unlimited.

Emergency Oversubscription Egress

0-1000

The oversubscription of calls (as percentage) allowed for emergency calls. Default = 10.

Extended Emergency IP Limit Egress0-40000Additional number of emergency calls (expressed as a numeric value) allowed for egress CAC group if call limit and emergency oversubscription quota are exhausted. Default = 0.

To Copy SIP CAC Profile

To copy any of the created SIP CAC Profile and to make any minor changes, click the radio button next to the specific SIP CAC Profile to highlight the row.

Click Copy SIP CAC Profile tab on the SIP CAC Profile List panel.

The Copy Selected SIP CAC Profile window is displayed along with the field details which can be edited.


Make the required changes to the required fields and click Save. The copied SIP CAC Profile is displayed at the bottom of the original SIP CAC Profile in the SIP CAC Profile List panel.

To Delete SIP CAC Profile

To delete a SIP CAC Profile, click the radio button next to the specific SIP CAC Profile which you want to delete.

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Click Yes to remove the specific SIP CAC Profile from the list.


  • No labels