Use the Signaling Packet Capture window to configure the Signaling Packet Capture utility. Signaling Packet Capture data is stored in a ".PKT" file in the location: /var/log/sonus/evlog/evlog
Note
This utility is intended for use in debugging and should only be used with a limited number of calls at any one time.
On the SBC main screen, go to Troubleshooting > Troubleshooting Configuration > Call Trace > Signaling Packet Capture.
The Signaling Packet Capture window is displayed.
Troubleshooting - Call Trace - Signaling Packet Capture
Use the following table to edit the fields and then click Save.
Signaling Packet Capture Parameters
| Parameter | Description |
|---|---|
| Signaling Packet Capture Timer | The signaling packet capture timer, in minutes, for both call and error trace filters. The value ranges from 0 to 360 minutes, with a default value of 180. |
| State | Use this flag to enable/disable signaling packet captures by enabling/disabling the timer.
|
Note
In the absence of any device or filter configuration, the Signaling Packet Capture feature only captures SIP/H.323 signaling for calls which are traced by Call Trace Filters.
Additional topics:
Overview
Content Tools