You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Back to Table of Contents

Back to CLI Configure Mode

Back to Profiles - CLI

Back to Signaling - CLI

In this section:

 X-headers are request HTTP header fields beginning with an "X", and are used for non-standard (or proprietary) additions to the regular fields in the HTTP header.

Command Syntax

% set profiles signaling XHeaderProfile <profile_name> 
	P-HeaderExtensions 
		P-Area-Info 
			RecvHeader <disabled|enabled> 
			SendHeader <disabled|enabled> 
		X-Header-default-value 
			X-IsupMtype-ACM 
				X-BCI <0-4 characters, in bytes> 
				X-OBCI <0-2 characters, in bytes> 
			X-IsupMtype-ANM 
				P-Area-Info <0-10 characters, in bytes> 
				X-BCI <0-4 characters, in bytes> 
				X-OBCI <0-2 characters, in bytes> 
			X-IsupMtype-IAM 
				CallingPartycategory <0-2 characters, in bytes> 
				X-FCI <0-4 characters, in bytes> 
				X-NOCI <0-2 characters, in bytes> 
			X-HeaderExtensions 
				X-ATP 
					RecvHeader 
					SendHeader 
				X-AUT 
					RecvHeader 
					SendHeader 
				X-BCI 
					RecvHeader 
					SendHeader 
				X-CALLING-NUM 
					RecvHeader 
					SendHeader 
				X-CHGDelay 
					RecvHeader 
					SendHeader 
				X-CHGInfo 
					RecvHeader 
					SendHeader 
				X-CONTRACT-ADDR 
					RecvHeader 
					SendHeader 
				X-Carrier-Info 
					RecvHeader 
					SendHeader 
				X-EMG 
					RecvHeader 
					SendHeader 
				X-FCI 
					RecvHeader 
					SendHeader 
				X-FWDORIG-NUM 
					RecvHeader 
					SendHeader 
				X-GENERIC-NUM 
					RecvHeader 
					SendHeader 
				X-ISUPEvent 
					RecvHeader 
					SendHeader 
				X-ISUPMtype 
					RecvHeader 
					SendHeader 
				X-NOCI 
					RecvHeader 
					SendHeader 
				X-OBCI 
					RecvHeader 
					SendHeader 
				X-ORIGCLD-NUM 
					RecvHeader 
					SendHeader 
				X-REDBWDINF 
					RecvHeader 
				X-REDCAP 
					SendHeader 
				X-REDCNT 
					RecvHeader 
					SendHeader 
				X-REDFWDINF 
					SendHeader 
				X-TMR RecvHeader 
					SendHeader 
				X-USI RecvHeader 
					SendHeader 
				X-HeaderFlags 	
					recvCfn 
					recvResume 
					recvSuspend 
					sendCfn 
					sendResume 
					sendSuspend

Command Parameters

The X- Header Parameters are as shown below:

X-Header Parameters

Parameter

Length/Range

Description

XHeaderProfile

N/A

Name of X-Header profile.

P-HeaderExtensions

N/A

Prescribes behavior associated with various P-Headers and P-K headers. Currently, only one option available:

  • P-Area-Info
    • RecvHeader – Enable to receive P-Area-Info header on the ingress leg.
      • disabled
      • enabled (default)
    • SendHeader – Enable to send P-Area-Info header on the egress leg.
      • disabled
      • enabled (default)

X-Header-default-value

N/A

Use this object to configure X Header default values.

  • X-IsupMtype-ACM– ACM default values.
    • X-BCI – Allow 4 bytes of X-BCI default data (default = 1014).
    • X-OBCI – Allow 2 bytes of X-OBCI default data (default = "").
  • X-IsupMtype-ANM– ANM default values.
    • P-Area-Info – Allow 10 bytes of P-Area-Info default data.
    • X-BCI – Allow 4 bytes of X-BCI default data. (default = 0014)
    • X-OBCI – Allow 2 bytes of X-OBCI default data. (default = "")
  • X-IsupMtype-IAM– IAM default values.
    • CallingPartycategory – Allow 2 bytes of CallingParty category default data. (default = 0A)
    • X-FCI – Allow 4 bytes of X-FCI default data. (default = 2001).
    • X-NOCI – Allow 2 bytes of X-NOCI default data. (default = 00).

X-HeaderExtensions

N/A

Use this object to enable/disable Receive and/or Send headers associated with specified X-Headers. See Table 2 for a list of X-Header parameters associated with this object.
For each X-Header parameter, enable or disable the associated RecvHeader and/or SendHeader flags:

  • RecvHeader – By default, this flag is enabled to allow reception of the specified X-Header on the ingress leg.
    • disabled
    • enabled (default)
  • SendHeader – By default, this flag is enabled to honor sending the specified X-Header on the egress leg.
    • disabled
    • enabled (default)

X-HeaderFlags

N/A

Collection of X-Header control flags which define specific behaviors as indicated.

  • recvCfn – Enable flag to interwork INFO messages with CONFUSION message types to ISUP.
    • disabled (default)
    • enabled
  • recvResume – Enable flag to interwork INFO messages with RESUME message types to ISUP.
    • disabled (default)
    • enabled
  • recvSuspend – Enable flag to interwork INFO messages with SUSPEND message types to ISUP.
    • disabled (default)
    • enabled
  • sendCfn – Enable flag to interwork ISUP messages CONFUSION messages to the SIP side.
    • disabled (default)
    • enabled
  • sendResume – Enable flag to interwork ISUP messages RESUME messages to the SIP side.
    • disabled (default)
    • enabled
  • sendSuspend – Enable flag to interwork ISUP messages SUSPEND messages to the SIP side.
    • disabled (default)
    • enabled

X-Header Extensions Descriptions

X-Header Extension

Description

X-ATP

Use to enable/disable X-ATP headers on incoming/outgoing directions separately.

X-AUT

Use to enable/disable X-AUT headers on incoming/outgoing directions separately.

X-BCI

Use to enable/disable X-BCI headers on incoming/outgoing directions separately.

X-CALLING-NUM

Use to enable/disable X-CALLING-NUM headers on incoming/outgoing directions separately.

X-CHGDelay

Use to enable/disable X-CHGDelay headers on incoming/outgoing directions separately.

X-CHGInfo

Use to enable/disable X-CHGInfo headers on incoming/outgoing directions separately.

X-CONTRACT-ADDR

Use to enable/disable X-CONTRACT-ADDR headers on incoming/outgoing directions separately.

X-Carrier-Info

Use to enable/disable X-Carrier-Info headers on incoming/outgoing directions separately.

X-EMG

Use to enable/disable X-EMG header on incoming/outgoing directions separately.

X-FCI

Use to enable/disable X-FCI headers on incoming/outgoing directions separately.

X-FWDORIG-NUM

Use to enable/disable X-FWDORIG-NUM headers on incoming/outgoing directions separately.

X-GENERIC-NUM

Use to enable/disable X-GENERIC-NUM headers on incoming/outgoing directions separately.

X-ISUPEvent

Use to enable/disable X-ISUPEvent headers on incoming/outgoing directions separately.

X-ISUPMtype

Use to enable/disable X-ISUPMtype headers on incoming/outgoing directions separately.

X-NOCI

Use to enable/disable X-NOCI headers on incoming/outgoing directions separately.

X-OBCI

Use to enable/disable X-OBCI headers on incoming/outgoing directions separately.

X-ORIGCLD-NUM

Use to enable/disable X-ORIGCLD-NUM headers on incoming/outgoing directions separately.

X-REDBWDINF

Use to enable/disable X-REDBWDINF headers on incoming/outgoing directions separately.

X-REDCAP

Use to enable/disable X-REDCAP headers on incoming/outgoing directions separately.

X-REDCNT

Use to enable/disable X-REDCNT headers on incoming/outgoing directions separately.

X-REDFWDINF

Use to enable/disable X-REDFWDINF headers on incoming/outgoing directions separately.

X-TMR

Use to enable/disable X-TMR headers on incoming/outgoing directions separately.

X-USI

Configurable in X Header Profile to enable or disable the X-USI headers on incoming/outgoing directions separately.

  • No labels