In this section:

Related articles:

Modified: for 6.2.1



Use the Retry Profile to configure a trigger/action rule to specify that when a particular response code (and optional warning code) is received (the trigger), the SBC performs a fallback action (fallback SRTP to RTP, fallback to IPV4 or fallback to IPV6). The SBC then reattempts an INVITE with the updated Session Description Protocol (SDP) offer based on the action configured for the received error response and warning code. 

To View Retry Profile

  1. On the SBC main screen, navigate to All > Profiles > Services > Retry Profile.

  2. The Retry Profile window is displayed.

    Retry Profile


To Edit Retry Profile

  1. Select the Retry Profile from the Retry Profile List window.

    Select Retry Profile


  2. The Edit Selected Retry Profile window is displayed.

    Edit Selected Retry Profile


  3. Make changes and click Save. Click Clear to cancel the changes.

To Copy Retry Profile

  1. Select the Retry Profile from the Retry Profile List window.

    Select Retry Profile


  2. Click Copy Retry Profile on the Retry Profile List window.

  3. The Copy Selected Retry Profile window is displayed.

    Copy Selected Retry Profile


  4. Make changes and click Save. Click Clear to cancel the changes.

To Create Retry Profile

  1. Click New Retry Profile on the Retry Profile List window.

  2. The Create New Retry Profile window is displayed.

    Create New Retry Profile


  3. Make changes and click Save. Click Clear to cancel the changes.

The fields displayed on the Create New Retry Profile window are:

Retry Profile - Parameter Description Table

ParameterLength/RangeDescription
Name1 to 23 charactersThe name of the Retry Profile. This profile is used to configure a trigger/action rule to specify that when a particular response code (and optional warning code) is received (the trigger).
StateN/A

 

The administrative state of this Retry Profile.

 

  • Disabled (default)
  • Enabled
Attempt Record GenerationN/A

Enable this flag to log an ATTEMPT record to the accounting file after each retry attempt.

  • Disabled (default)
  • Enabled
Trigger Action Rule  
Rule Index1-16The index for this trigger/action rule. Each rule contains a configurable SIP response code, an optional warning code, and an action to take against the trigger.
SIP Response Code300-699List up to 16 SIP response codes that will trigger the specified action for this Trigger Action Rule.
SIP Warning Code300-399Optionally list up to 16 SIP warning codes received in the Warning header for this Trigger Action Rule.
Action
  
Action Index1-16The action index for this Trigger Action Rule. Up to 16 actions can be assigned to a Trigger Action Rule. Each action contains an Action Type as specified in the next row.
Action TypeN/A

The action(s) to take against the specified trigger.

  • fallBackSrtpToRtp
  • fallBackToIPV4
  • fallBackToIPV6

Note: An Action can include more than one Action Type. However, it does not support both IPv4 and IPv6 addresses at the same time.

 

To Delete Retry Profile

  1. Select the Retry Profile from the Retry Profile List window. 

    Select Retry Profile

  2. Click the delete icon corresponding to the selected Retry Profile. 

  3. The Delete retryProfile dialog-box is displayed.   

    Delete retryProfile

  4. Click Yes to confirm deletion, or No to cancel it.
  5. On successful deletion, a success message is displayed.
  6. Click Ok on the success message to complete the deletion process.