Use this object in a SBC ERE configuration to create Internal-to-SIP and SIP-to-Internal SIP Cause Mapping Profile names for this IP Signaling Profile.
SBC applies the Cause Code Mapping profile in the following order:
If a policy response contains a profile name and a locally configured profile uses the same name, SBC applies the same name.
If a policy response does not contain a profile name or if the profile name does not match with any local profile, SBC applies the SIP Trunk Group created local profile name (if created).
SBC applies a default profile name if none of the above two cases match.
To View and Edit SIP Cause Mapping
On the SBC main screen, go to All > Profiles > Signaling > Ip Signaling Profile > Egress Ip Attributes > SIP Cause Mapping. The SIP Cause Mapping window is displayed.
DEFAULT_SIP
On the SIP Cause Mapping window, choose Ip Signaling Profile as DEFAULT_SIP to view the SIP Cause Mapping parameters for SIP Trunk Group.
Figure 1: SIP Cause Mapping - SIP
The following fields are displayed:
Table 1: SIP Cause Mapping - SIP
Parameter | Description |
---|---|
Internal To SIP Cause Mapping Profile Name | Specifies the name associated with Internal to SIP cause mapping profile. |
SIP To Internal Cause Mapping Profile Name | Specifies the name associated with SIP to Internal cause mapping profile. |
Make the required changes and click Save to save the changes made.