You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

In this section:

Overview

To configure inter/intra Direct Media call:

  • Ingress and egress Trunk Groups must have the flag directMediaAllowed enabled.
  • Ingress and egress Trunk Groups must have same directMediaGroupId.
  • PSP for Trunk Groups must have the flag useDirectMedia enabled.
  • IP signaling profile for AS TG must have the flag sendDirectMediaInfoInSdpAttribute enabled (for xdmi).

To configure anti-trombone Direct Media call,

  • AS Trunk group must have the flag directMediaAntiTrombone enabled.

The basic Direct Media call with ICE and DTLS configuration contains:

Enabling ICE and DTLS on Both the Ingress and Egress Trunk Groups

% set addressContext default zone ZONE1 sipTrunkGroup psxInSBXTG services natTraversal iceSupport iceWebrtc
% set addressContext default zone ZONE1 sipTrunkGroup psxOutSBXTG services natTraversal iceSupport iceWebrtc
% set addressContext default zone ZONE1 sipTrunkGroup psxInSBXTG media dtlsProfileName defaultDtlsProfile
% set addressContext default zone ZONE1 sipTrunkGroup psxOutSBXTG media dtlsProfileName defaultDtlsProfile

Using PSP on Trunk Groups

% set addressContext default zone ZONE1 sipTrunkGroup psxInSBXTG policy media packetServiceProfile PSP_RTP_DM
% set addressContext default zone ZONE1 sipTrunkGroup psxOutSBXTG policy media packetServiceProfile PSP_RTP_DM

Enabling Direct Media on Ingress and Egress Trunk Groups

% set addressContext default zone ZONE1 sipTrunkGroup psxInSBXTG media directMediaAllowed enabled
% set addressContext default zone ZONE1 sipTrunkGroup psxOutSBXTG media directMediaAllowed enabled

Setting Same Direct Media Group IDs on Ingress and Egress Trunk Groups

% set addressContext default zone ZONE1 sipTrunkGroup psxInSBXTG media directMediaGroupId 200
% set addressContext default zone ZONE1 sipTrunkGroup psxOutSBXTG media directMediaGroupId 200

The commands shown in the Configuring ICE Direct Media Call section are only for example.

Call Detail Status

% show status global callDetailStatus

mediaStreams                        audio;
state                               Stable;
callingNumber                       5000500001;
calledNumber                        5000500001;
............
callDuration                        3;
mediaType                           directmedia;
ingressMediaStream1LocalIpSockAddr  "255.255.255.255/ 65535 (rtcp:65535)"; 
ingressMediaStream1LocalIp          255.255.255.255;
ingressMediaStream1LocalPort        65535;
............
ingressMediaStream1RemoteIpSockAddr  "127.0.0.0/ 5004 (rtcp:5004)";   
ingressMediaStream1RemoteIp          127.0.0.0;
ingressMediaStream1RemotePort        5004;
............
egressMediaStream1LocalIpSockAddr    "255.255.255.255/ 65535 (rtcp: 65535)";
egressMediaStream1LocalIp            255.255.255.255;
egressMediaStream1LocalPort          65535;
............
egressMediaStream1RemoteIpSockAddr   "127.0.0.0/ 5004 (rtcp: 5004)";
egressMediaStream1RemoteIp           127.0.0.0;
egressMediaStream1RemotePort         5004;
............
ingressMediaStream1IceState          NONE;   
egressMediaStream1IceState           NONE;
ingressDtlsStream1                   DISABLED;   
egressDtlsStream1                    DISABLED;
iceCallTypes                         "ing-lcl-NONE ing-rmt-NONE eg-lcl-NONE eg-rmt-NONE"

Call Media Status

show status global callMediaStatus
callMediaStatus 524296 {
    mediaStreamsInCall                          audio;
    ingressMacHeader                            0-0-0-0-0-0;
    egressMacHeader                             0-0-0-0-0-0;
    ingressBearerType                           multimedia;
    egressBearerType                            multimedia;
    ingressCfgAudioType                         na;
    egressCfgAudioType                          na;
    ingressActAudioType                         na;
    egressActAudioType                          na;
    ingressRemPacketsLost                       0;
    ingressRFactorInbound                       93;
    ingressRFactorOutbound                      93;
    egressRemPacketsLost                        0;
    egressRFactorInbound                        93;
    egressRFactorOutbound                       93;
    mediaStream1Label                           audio;
    mediaStream1Codec                           G711;
    ingressMediaStream1PacketsSent              0;
    ingressMediaStream1PacketsReceived          0;
    ingressMediaStream1OctetsSent               0;
    ingressMediaStream1OctetsReceived           0;
    ingressMediaStream1RtcpPacketsSent          0;
    ingressMediaStream1RtcpPacketsReceived      0;
    ingressMediaStream1PacketsLost              0;
    ingressMediaStream1PacketsDiscarded         0;
    ingressMediaStream1PacketLatency            0;
    ingressMediaStream1InterarrivalJitter       0;
    ingressMediaStream1StunDtlsPacketsReceived  0;
    ingressMediaStream1StunDtlsPacketsDiscarded 0;
    ingressMediaStream1SrtpAuthFailure          0;
    ingressMediaStream1SrtpReplayFailure        0;
    egressMediaStream1PacketsSent               0;
    egressMediaStream1PacketsReceived           0;
    egressMediaStream1OctetsSent                0;
    egressMediaStream1OctetsReceived            0;
    egressMediaStream1RtcpPacketsSent           0;
    egressMediaStream1RtcpPacketsReceived       0;
    egressMediaStream1PacketsLost               0;
    egressMediaStream1PacketsDiscarded          0;
    egressMediaStream1PacketLatency             0;
    egressMediaStream1InterarrivalJitter        0;
    egressMediaStream1StunDtlsPacketsReceived   0;
    egressMediaStream1StunDtlsPacketsDiscarded  0;
    egressMediaStream1SrtpAuthFailure           0;
    egressMediaStream1SrtpReplayFailure         0;
} 

The Call Media Status shows that there is no packets sent or received and the media flow is direct between the endpoints.

For more information on Direct Media Calls, refer to the section Direct Media and Anti-trombone Support for ICE and DTLS.

  • No labels