Usage of the Easy Config wizard to configure the SBC Edge (SBC) does not modify existing configuration. The wizard will simply add the new configuration elements to the SBC.
The SBC Easy Config interface includes a built-in step-by-step setup configuration wizard, which enables end-users to quickly deploy SBC in an Enterprise's VoIP environment with a SIP Trunk Provider to an IP phone. The SBC can be configured to use a SIP trunk to connect to IP phones using the automatic setup wizard as described in the section below.
The following SIP Trunks are supported:
NTT DOCOMO Officelink, Softbank White Office and Telstra Enterprise SIP Connect are supported in SBC Edge 1000-2000 only.
Broadsoft Trunk is applicable only if the user endpoint is an IP phone.
Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.
These instructions assume the SBC Easy Config wizard is running. See Using the Easy Configuration Wizard.
Select the Application type (SIP Trunk ↔ IP Phones). Enter the scenario configuration details based on your deployment settings. Once completed, click Next to move to Step 2 (or Cancel to return to the main WebUI screen).
The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ IP Phones.
Enter the name to describe the SIP Trunk ↔ IP Phone setup.
This value will be prefixed on all the SBC configuration elements created by the Setup Wizard pertaining to this deployment.
The country in which the SIP Trunk ↔ IP Phones originates.
The E911 Elin number from the "CompanyName" field configured in Lync location services is used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, see Creating and Modifying Entries to Transformation Tables.
This field defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below.
Options: ELIN Identifier, E911/E112 or None.
Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.
Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.
Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters.
Number of simultaneous SIP sessions allocated. Valid entry 1 - 960.
The SIP trunk used for connection to the IP phones. Valid options: ATT SIP Trunk, Other SIP Trunk, Verizon SIP Trunk, KDDI SIP Trunk, Broadsoft Trunk, SoftBank White Office, and NTT DOCOMO Officelink.
The SIP Trunk selected determines the field options displayed in Step 2. See Step 2 - Configure SIP Details for Endpoint.
Defines the Broadsoft Trunk Type. Valid entry: Enterprise or Access.
This field is available only when the SIP Trunk type is Broadsoft Trunk.
Enter the scenario configuration details based on your endpoint. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).
These fields apply if you selected AT&T SIP Trunk in Step 1 - Select Scenario.
The FQDN or IP address of the Remote Peer service provider.
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP.
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.
Enables or disables the secondary Remote Peer service provider configured.
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.
The Port Number is used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.
Enables/disables support for the AT&T Simulataneous Ring feature. Valid option: Yes or No.
Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled.
The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled.
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.
Configure a network address and Netmask for the host or subnet in which the IP phone resides.
Network IP. IP address for the destination host or subnet in which the IP phone resides.
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the () icon. Enter the Network IP and Network Mask and click OK.
These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.
The main telephone number associated with the SIP trunk.
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
For SIP Registrar, refer to
Configure a network address and Netmask for the host or subnet in which the IP phone resides.
Network IP. IP address for the destination host or subnet in which the IP phone resides.
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
These fields apply if you selected NTT DOCOMO Officelink Trunk in Step 1 - Select Scenario.
For an IP Phone as the user end point, Easy Configuration loads a generic template which follows the “National Numbering Plan” guidelines.
Office Link FOMA-R
Protocol
Port
CUG Domain Name
IP Phone Numbering Plan
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
Number of Users
Protocol (IP Phone)
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
Port Number
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.
IP Phone Network Addresses
Configure a network address and Netmask for the host or subnet in in which the IP phones reside.
To create a network address, click the ( ) icon. Enter the Network IP and Network Mask and click OK.
These fields apply if you selected Other SIP Trunk in Step 1 - Select Scenario.
The FQDN or IP address of the Remote Peer service provider.
The IP protocol used for sending and receiving SIP messages between the SBC and the Border Element Server. Valid entry UDP or TCP.
The SIP Server Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. Default entry: 5060.
Enables or disables the secondary Remote Peer service provider configured.
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.
The Port Number used for sending and receiving messages between the SBC and the Secondary Border Element server. Default entry: 5060. This field is available only when Use Secondary Border Element Server is Enabled.
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
The Port Number used for sending and receiving messages between the SBC and the IP phone. Default entry: 5060.
Configure a network address and Netmask for the host or subnet in in which the IP phones reside.
Network IP: IP address for the destination host or subnet in which the IP phone resides.
Netmask: The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the () icon. Enter the Network IP and Network Mask and click OK.
These fields apply if you selected SoftBank White Office in Step 1 - Select Scenario.
The method used for connecting networks. Options are: Routerless and Router. On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only.
The user-specified IP address to be used for SIP signaling messages. The Signaling/Media Source IP field does not display when the option selected for the WAN Link field is Router.
The host IP address or FQDN for the SIP server.
The ID used for authenticating with the router at the gateway of the network.
The password used for authenticating with the router at the gateway of the network.
Re-entry of the password for the router serving as the network gateway.
The public address that points to the domain for users, for use in the Contact Registrant Entry. For example, specify: GatewayID@SIPServer.
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.
Configure a network address and Netmask for the host or subnet in in which the IP phones reside.
Network IP. IP address for the destination host or subnet in which the IP phone resides.
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the () icon. Enter the Network IP and Network Mask and click OK.
These fields apply if you selected Telstra Enterprise SIP Connect in Step 1 - Select Scenario.
The state to use in configuring the outbound proxy for the Provider SIP Trunk. Options include: Australia Capital Territory, New South Wales, Northern Territory, Queensland, South Australia, Tasmania, Victoria, and Other (a user-specified FQDN).
Hard coded as UDP and Port 5060.
The IPv4 address used to create a Split DNS entry for the Telstra domain.
The SIP Connect Domain or Realm to which the specified IP address will map.
The User ID for use in authentication.
The password to use when authenticating with the User ID.
The re-entered password for confirmation.
The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service.
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.
Configure a network address and Netmask for the host or subnet in in which the IP phones reside.
Network IP. IP address for the destination host or subnet in which the IP phone resides.
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the ( ) icon. Enter the Network IP and Network Mask and click OK.
These fields apply if you selected Verizon Managed Service in Step 1 - Select Scenario.
The FQDN or IP address of the Remote Peer service provider.
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP.
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.
Configure a network address and Netmask for the host or subnet in which the IP phone resides.
Network IP. IP address for the destination host or subnet in which the IP phone resides.
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the () icon. Enter the Network IP and Network Mask and click OK.
These fields apply if you selected Broadsoft Trunk in Step 1 - Select Scenario.
The FQDN of the server domain.
Enables/disables Enterprise Trunking. This field is available only when Enterprise Trunking is selected in the Broadsoft Trunk Type field.
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.
Configure a network address and Netmask for the host or subnet in which the IP phone resides.
Network IP. IP address for the destination host or subnet in which the IP phone resides.
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the ( ) icon. Enter the Network IP and Network Mask and click OK.
This steps displays a summary of the the configuration items from Step 1 and Step 2. Click Finish (to cancel the configuration, click Cancel).
This example displays a SIP ↔ IP Phones with a Generic SIP Trunk.