Ribbon SBC 1000 Hardware Specifications

This section describes the dimensional, environmental, power, and network specifications and requirements for theSBC 1000 System.

Not applicable to SBC SWe Edge.

Dimensions and Weight

Equipment	Height mm/in.	Width mm/in.	Depth mm/in.	Weight lb./kg
Chassis with no interface cards or expansion modules	42.00 / 1.65	441.60 / 17.38	299.00 / 11.77	8.50 / 3.85
Maximum supported configuration	(1RU) - 44 mm / 1.75 in	444 mm / 17.5 in.	305 mm / 12 in.	5.67 kgs / 12.5 lbs

Environmental Parameter	Specification
Operating Environmental Conditions	Temperature: 5º to 40º Celsius Humidity: 5% to 85% RH non-condensing Altitude: 60 meters below sea level to 1800 meters above sea level
Storage Environmental Condition	Temperature: -40º to 70º Celsius
Cooling System	Internal forced convection

For information about the SBC 1000 power supply units, see Ribbon SBC 1000-2000 System Power Supplies.

The 10/100/1000 Base-T port pinouts are as follows:

Ethernet Port

Ethernet Connector Pinouts

Pin Number	Signal	Definition	Color
1	TX +	Transmit Data	White w/orange
2	TX -	Transmit Data	Orange
3	RX +	Receive Data	White w/green
4	RSVD	Reserved	Blue
5	RSVD	Reserved	White w/blue
6	RX -	Receive Data	Green
7	RSVD	Reserved	White w/Brown
8	RSVD	Reserved	Brown

Additional Resources