Configuring PSX FQDN as Remote Policy Server

This section explains the prerequisites and the configurations to be done on the SBC SWe cluster and PSX Manager so that the SBC cluster has the view of the PSX cluster and the PSX has the view of the SBC cluster. To configure SBC SWe clusters as gateways in the PSX SWe Manager, refer to "Configuring SBC Cluster ID as Gateway" in the PSX documentation.  

Prerequisites

• EMS instance is up and running
• PSX Master instance is up and running

The PSX instances within a cluster must be visible to the instances within the SBC SWe cluster.  Registering the PSX cluster FQDN in the Remote Policy Server, instead of the IP address, allows the SBC SWe to have a view of the PSX instances within the cluster. When a new instance is created, it will query the PSX using the FQDN.

Access the SBC Configuration Manager

1. Log onto RAMP.

2. Click Network > Cluster Management. The Cluster Management / Manage VNFs window opens listing the SBC clusters created on RAMP.

   
   
3. Click the radio button adjacent to the name of the cluster you want to configure. The Details tab for the selected cluster opens. 

4. Click the Configurations tab.

   
   

5. Click Edit Configuration. The SBC Configuration Manager opens in a separate window against the cluster's active OAM node. See the EMA User Guide for information on using the GUI to configure the SBC.

   
   

Disable the PSX Local Server

1. Navigate: All > System > Policy Server > Local Server or
   Configuration > Policy Server > Local   Select the PSX_LOCAL_SERVER.

2. Change the State to Disabled and Mode to Out of Service.

3. Click Save.
   Figure 1: Local Server
   

   
   

Add a Remote Policy Server with the PSX Cluster FQDN

1. Navigate: All > System > Policy Server > Remote Server or
   Configuration > Policy Server > Remote Server. The Remote Server window opens.
   Figure 2: Remote Server Window

   
   

2. Click New Remote Server and add the required values, for example:

   1. In Name enter a name (PSX_15).

   2. Enter the FQDN of the PSX cluster, for example "psx2.rbbn.com".

   3. Select the radio button for Enabled.

   4. Change the Mode to Standby.
      Figure 3: Remote Policy Server Values

      
      

   5. Click Save.
      Figure 4: Remote Policy Server List

      
      

   6. Create another Remoter Server with the following details:

      1. Name: PSX_14
      2. FQDN: psx1.rbbn.com (example)
      3. Mode: Active

The PSX Master cluster FQDN is added to the SBC configuration.

Saving and Activating the Configuration in the Cluster

Once you have completed making configuration changes, click Apply Saved Changes and Close at the top-right of the SBC Configuration Manager window. When prompted, confirm that you want to save and activate your configuration changes. The SBC Configuration Manager window closes.