You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

In this section:

 

This profile specifies the type and behavior of security mechanism to apply to the Access Solution acting as P-CSCF.

Note

When configuring Sip Security Profile on a particular SIP Trunk Group, ensure Authcode Headers transparency flag (see Common Ip Attributes - Transparency Flags) is not enabled on the same Trunk Group.

Note

When configuring a SIP Security Profile in P-CSCF mode, a Sip Security Mechanism is required.

IMPORTANT

The Transparency Profile is the recommended method of configuring transparency on the SBC Core for new deployments as well as when applying additional transparency configurations to existing deployments. Do not use IP Signaling Profile flags in these scenarios because the flags will be retired in upcoming releases.

Refer to the SBC SIP Transparency Implementation Guide for additional information.

To View Sip Security Profile

On SBC main screen, go to Configuration > Profile Management > Category: Service Profiles > Sip Security Profile.

The Sip Security Profile window is displayed.

Profile Management - Service Profiles - Sip Security Profile

To Edit Sip Security Profile

To edit any of the Sip Security Profile in the list, click the radio button next to the specific Sip Security Profile name.

Profile Management - Service Profiles - Sip Security Profile Highlighted

The Edit Selected Sip Security Profile window is displayed below.

Profile Management - Service Profiles - Sip Security Profile Edit Window

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To Create Sip Security Profile

To create a new Sip Security Profile, click New Sip Security Profile tab on the Sip Security Profile List panel.

Profile Management - Service Profiles - Sip Security Profile Fields

The Create New Sip Security Profile window is displayed.

Profile Management - Service Profiles - Sip Security Profile Create Window

The following fields are displayed:

SIP Security Profile

Parameter

Description

Name

Specifies the user name of this Security Profile.

Sbx Sec Mode

Use this parameter to define the SBC security mode for this SIP Security Profile. The options are:

  • Sbc-pcscf: SBC acts as integrated SBC+PCSCF mode.
  • Sbc-only: SBC-only mode. SBC disregards the configured security mechanism (ipsec-3gpp or tls) in the profile, if any.

When Sbx Sec Mode is configured as sbc-only, you must configure a Transparency Profile for following headers in an egress trunk group.

Refer to SIP Security Profile - CLI, Command Examples section to know more on how to configure a Transparency Profile.

Refer to P-CSCF Security Mechanisms to know the functionality of this feature.

Force Client
Security

If enabled, while selecting the Security Mechanism, the precedence is given to the order of occurrence of mechanism-name values in the Security-Client header.

The options are:

  • enabled
  • disabled

Reject Sec Unsupported Request

Enable this flag to reject the incoming REGISTER when it does not contain "sec-agree" header value (in Require or Proxy-Require headers) or does not contain any supported mechanism-name (ipsec-3gpp) in "Security-Client" header.
Use default setting "disabled" to process messages using "Digest without TLS" security mechanism.

  • disabled (default)
  • enabled
Security Mechanism Type 

Identifies the list of security mechanisms supported by 

Unable to show "metadata-from": No such page "_space_variables"
and the corresponding precedence level for each security mechanism.

  • ipsec-3gpp
Precedence Specifies the precedence value of this SIP Security Mechanism Type (lowest value has higher precedence). The value range from 1 to 65535.

To Delete Sip Security Profile

To delete any of the created Sip Security Profile, click the radio button next to the specific Sip Security Profile which you want to delete.

Profile Management - Service Profiles - Sip Security Profile Highlighted

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Profile Management - Service Profiles - Sip Security Profile Delete Confirmation

Click OK to remove the specific Sip Security Profile from the list.

 

  • No labels