System Provisioning - Ip Signaling Profile - Egress Ip Attributes - BCI

Use this object to configure the Backward Call Indicator (BCI) for Egress IP attributes.

To View and Edit BCI

On the SBC main screen, choose a path:

Configuration > System Provisioning > Category: Trunk Provisioning > IP Signaling Profile > Egress IP Attributes > BCI
Configuration > System Provisioning > Category: Call Routing > Profiles > IP Signaling Profile > Egress IP Attributes > BCI
Configuration > Profile Management > Category: Signaling Profiles > IP Signaling Profile > Egress IP Attributes > BCI
All > Profiles > Signaling > IP Signaling Profile > Egress IP Attributes > BCI

The BCI window is displayed.

DEFAULT_H323

On the BCI window, choose the IP Signaling Profile as DEFAULT_H323 to view the BCI fields for the H.323 Trunk Group.

Trunk Provisioning - Egress IP Attributes H323 BCI

Egress IP Attributes H323 BCI Parameters

Parameter

Description

BCI Interwork Encountered

Enable this flag to indicate that ISUP is interworking with a network that cannot provide as many services as ISUP does. ISUP networks will, therefore, not employ certain features they otherwise normally do, including potentially the use of ISDN cause codes in failure conditions.

Disable (default)
Enable

BCI ISDN Address

Enable this flag to enable the ISDN Address in the BCI parameter of backward SS7 messages (e.g. ACM or ANM).

Disable (default)
Enable

DEFAULT_SIP

On the BCI window, choose the IP Signaling Profile as DEFAULT_SIP to view the BCI fields for a SIP Trunk Group.

Trunk Provisioning - Egress IP Attributes SIP BCI

Egress IP Attributes SIP BCI Parameters