DO NOT SHARE THESE DOCS WITH CUSTOMERS!

This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.

 

This window displays memory utilization statistics for the 'n' number of intervals.

On the SBC main screen, go to Monitoring > System > Category: Hardware Status > Memory Util Interval Statistics. The Memory Util Interval Statistics window is displayed.

Memory Util Interval Statistics

The following fields are displayed:

Memory Util Interval Statistics Parameters

ParameterDescription
Number Sequence number which identifies the interval for which the set of statistics is required.
Ce name SBC node name.
Interval ValidA setting of 'true' indicates the interval contains valid data during the time interval. Each interval is for a configurable fixed time (default interval is 15 minutes) starting on the hour. For example, if the system starts at 12:05, the first interval at 12:15 will not be valid because it is less than the 15-minute interval. Subsequent intervals will be valid upon meeting the 15-minute time interval. System switch-overs also cause invalid intervals because data is lost during the interval.
  • false
  • true
Int TimeThe system up time when the interval statistics are collected.
Average The average memory utilization percentage for this interval.
HighThe high memory utilization percentage for this interval.
LowThe low memory utilization percentage for this interval.
Average SwapThe average swap memory utilization percentage for this interval.
High Swap The high swap memory utilization percentage for this interval.
Low Swap The low swap memory utilization percentage for this interval.

By default, only ten entries are displayed in a view. Use the Show <number> entries drop-down box to select the number of entries to display.

  • No labels