You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Back to Table of Contents

Back to Configuration

Back to Configuration - Intercept

Back to Intercept - Call Data Channel

Additional sections:

In this section:

This object displays the user configured LI Mediation Server.

To View Mediation Server

To view Mediation Server, log on as "Calea" user. For more information, refer to Users and Application Management - User and Session Management.

On SBC main screen, navigate to Configuration > Intercept > Call Data Channel > Mediation Server.

Mediation Server is supported only for PCSI and IMS LI configurations. Refer Intercept Flavors and Configuration Details for configuration details.

The Mediation Server can be checked for default Address Context and each Call Data Channel. Use the drop-down box to select the default Address Context and Call Data Channel.

Mediation Server Main Field

The Mediation Server window is displayed.

Mediation Server

To Create Mediation Server

To create a new Mediation Server, click New Mediation Server tab on the Mediation Server List panel.

Mediation Server Field

The Create New Mediation Server window is displayed.

Create New Mediation Server

The following fields are displayed:  

Create New Mediation Server Parameters

Parameter

Description

Msname

Specifies the name of the Mediation Server for signaling interception.

Signaling

Signaling is supported only for IMS LI configuration. Refer Intercept Flavors and Configuration Details for configuration details.


IP Address V4 or V6 

IPV4/IPV6 address of the mediation server for signaling interception.

Port Number 
Specifies the port number of the mediation server for signaling interception. Range is 0 - 65535.

Dscp Value

Specifies the DSCP value for intercepted media packets sent on this port. Default value is 16 and range is 0 - 63.

Protocol Type

Specifies the protocol used by the mediation server for signaling interception. Options are:

  • TCP (default) 
  • UDP

UDP is not supported in SBC Release V05.01.00R000.

Mode

Specifies the mode of the signaling connection towards the mediation server. Options are:

  • In Service
  • out of service (default)

State

Specifies the state of the signaling connection towards the mediation server. Options are:

  • Disabled (default) 
  • Enabled

To Copy Mediation Server

The user calea with the role "Calea" is not allowed to perform "Copy" operation.

Copy operation information for Call Data Channel

To Delete Mediation Server

If Mediation Server which you wish to delete is configured for PCSI or IMS, then ensure that:

  • Media and Signaling (for IMS configuration only) mode are Out of Service and
  • Media and Signaling (for IMS configuration only) state are Disabled

before performing the below procedure. Refer xx to edit media profile xx to edit signaling.

To delete any of the created Mediation Server, click the radio button next to the specific Mediation Server which you want to delete.

Mediation Server Highlighted

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Mediation Server Delete Confirmation

 

Click Yes to remove the specific Mediation Server from the list.

  • No labels