In this Section:
Specifies whether the Flags should be enabled or not.
To View and Edit Flags
On SBC main screen, navigate to All > Profiles > Media > Tone And Announcement Profile > Local Ring Back Tone > Flags.
Select the desired Tone And Announcement Profile from the drop-down list to view its respective Flags parameters.
The Flags window is displayed.
Profile Management - Media Profiles - Local Ring Back Tone - Flags
Note
To view the flag Annoucement Based Tones, the option Signaling Tone Package State must be enabled in Local Ring Back Tone.
The following fields are displayed:
Flags Parameters
| Parameter | Description |
|---|---|
Use This Lrbt For Egress | Specifies Lrbt state of the Egress:
|
| Specifies Lrbt state of the Ingress:
|
Dynamic LRBT | Use this flag to play tone locally on receipt of 180 with SDP, until RTP is received from the remote peer.
|
Force LRBT | Use this flag to play tone locally on receipt of any 18x with or without SDP, until 200 OK (INVITE) or UPDATE is received from the remote peer.
|
Announcement Based Tones | Use this flag to play tones as announcements by using stored files. This mode does not use DSP resources.
NOTE: If this flag is disabled, the SBC uses DSP (TNAPAD) to generate and play tones. |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools