REST API Method: PUT /rest/remotelog/{identifier}

Creates a Remote Log Configuration Table given a specific Table ID.

URL:

https://192.168.0.111/rest/remotelog/{identifier}

HTTP Method

PUT

Requires Authentication:

true

remotelog - REST API Methods

Parameters

Parameter Name Required Service Affecting Data Type Default Value Possible Values Description
ConfigIEStateNoYesEnum1Possible values:
  • 0 - esDISABLED
  • 1 - esENABLED
Specifies the Administrative State of the resource.
DefaultLevelYesNoEnum4Possible values:
  • 0 - llDefault
  • 1 - llTrace
  • 2 - llDebug
  • 3 - llInfo
  • 4 - llWarn
  • 5 - llError
  • 6 - llFatal
  • 7 - llOff
 Controls the default minimum severity level of messages sent to this server. This default value can be overridden on a per-system basis via the Subsystems Configuration. Informational will produce the most output, and Fatal will produce the least. {note}Trace and Debug are not allowed to be set for the global log level.
SyslogFacilityYesNoEnum9Possible values:
  • 0 - sfUser
  • 1 - sfKern
  • 2 - sfMail
  • 3 - sfDaemon
  • 4 - sfAuth
  • 5 - sfLpr
  • 6 - sfNews
  • 7 - sfUucp
  • 8 - sfCron
  • 9 - sfLocal0
  • 10 - sfLocal1
  • 11 - sfLocal2
  • 12 - sfLocal3
  • 13 - sfLocal4
  • 14 - sfLocal5
  • 15 - sfLocal6
  • 16 - sfLocal7
Controls which Syslog Facility will be used when sending log entries. This can be used to facilitate the sorting of messages from different nodes on a central Syslog server.
ServerAddressYesNostringnone128 - Max Length Specifies the IP address or FQDN of the Syslog server where log entries will be sent.
ServerPortYesNoint514Possible values:
  • 514 - Minimum
  • 65534 - Maximum
Specifies the Syslog server port number where log entries will be sent.
ServerTransportYesNoEnum0Possible values:
  • 0 - stUDP
  • 1 - stTCP
  • 2 - stTLS
Specifies the protocol to be used for sending log entries to the Syslog server.

  • No labels