Installing an ASM Package

ASM package updates can be installed by Ribbon SBC 1000/2000 System Administrators via the web interface. This functionality is typically used under the following circumstances:

• Updating the SBC 1000/2000 Communication Service on the ASM
• Installing Lync Cumulative Update (CU) patches on the ASM
• Installing other Roll-up packs such as windows update authorization lists
• Installing approved Third party software (i.e, SDN Listener or Skype debug tools)
• Installing a new BIOS package on the ASM
  
  

On this page, we show how to install packages on the ASM via the WebUI.

Installing an ASM Package

This operation can be accessed either via the Tasks tab or the Settings tab:

ASM Update via Tasks Tab

ASM Update via Settings Tab

1. In the WebUI, click the Tasks or Settings tab.

2. In the left navigation pane, under the Application Solution Module, click Install ASM Update.

3. Browse to the desired .pkg file.

4. Select the ASM package file you wish to install.

   

5. Click Ok to install the package. The installation progresses. The sequence of installation steps are shown below.

    
   Install ASM Update - Upgrade Progress

   

   
   

   Install ASM Update - Current Activity Status

   

   
   The following message is displayed when the installation is complete.
   
   Install ASM Update - Complete

   

   
   

   • If the update is for a windows update .pkg pack, refer to the operation status page to initiate windows update install
   • If the installation failed a detailed status message indicating the reason for the failure will be displayed
   Verification Tip

   • If you have installed an  SBC 1000/2000 Communication Service update, verify the update by Viewing the SBC 1000/2000 Communication Service Version.
   • If you have installed a Lync SBA CU patch, verify the update by checking the versions of each Lync Service.
   • For further information in windows update refer to ASM Roll-up Update