You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

The SBC supports IPv4 addresses for this feature; IPv6 is not supported.

To create an Entry in a Static ARP Table:

  1. In the WebUI, click the Settings tab.

  2. In the left navigation pane, go to Protocols > IP > Static ARP Tables. See below for examples for both SBC 1000/2000 and SBC SWe Lite.

     

    Static ARP Table - SBC 1000/2000

    Static ARP Table - SBC SWe Lite


     

Creating an Entry in a Static ARP Table

  1. Click the Create Static ARP Table Entry ( ) icon at the top of the Static ARP Table page.

    Create Static ARP Entry

     


  2. Enter an IP Address (IPv4 only).
  3. Enter a MAC Address.
  4. Click OK

The IP address (and subsequent MAC address) must belong to a device which is a member of a subnet defined for the Sonus SBC 1000/2000.

  • No labels